Sonneman Stix 2789.16 Käyttöohje
Lue alta 📖 käyttöohje suomeksi merkille Sonneman Stix 2789.16 (2 sivua) kategoriassa Lamppu. Tämä opas oli hyödyllinen 15 henkilölle ja sai 4.4 tähden keskimäärin 8 käyttäjältä
Sivu 1/2
©2017 SONNEMAN - A WAY OF LIGHT 1 of 2
February 13, 2017
LED Product Information and Warnings
Important
• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.
• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.
• Please read all included assembly instructions and warnings carefully before installation. Contact
Customer Service if you have any questions or concerns. Before installation, please conrm that the xture
is compatible with your supply voltage and dimming system, if present.
• LEDs are highly sensitive electronic devices, and must be treated with care. Do not open any factory
sealed compartments, and avoid touching the LEDs with your hands or any object.
• Although all our xtures are equipped with protective devices, LED xtures are vulnerable to power surges
and supply variations. Do not install LED xtures on the same circuit as any motors, appliances, or HVAC
systems.
• Do not remove or bypass any LED Driver or Transformer that is provided with the xture, and do not
replace or substitute with another power supply.
• Remote LED Driver or Transformer installation must be done by a licensed electrician and in accordance
with local codes. Remote installations should be in an accessible location, as close to the xture as possible.
• Fixtures must be wired in parallel on independent leads; do not "daisy chain" multiple xtures together or
wire them in series.
• All factory-made splices and connections must remain intact. LED circuits are carefully designed and built,
and improper connections may damage the xture.
• The ends of coaxial pendant cords have been precisely stripped and split at the factory and must not be
eld cut. Excess cord or cable should be neatly coiled and reserved in the xture canopy.
• Any mounting hardware is provided for your convenience and should be used with discretion. Always use
the appropriate hardware for the mounting surface.
©2017 SONNEMAN - A WAY OF LIGHT 2 of 2
February 13, 2017
Assembly Instructions
INSTRUCTIONS D’INSTALLATION
Important
• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.
• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.
Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.
Note
• This xture is dimmable with Electronic Low Voltage (Trailing-Edge), Incandescent (Leading-Edge), and 0-10V type
dimmers only.
Care Instructions
• Dusting: Use a clean, dry cloth.
• Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.
2786, 2787, 2788, 2789
A
B
C
E
E
K
2786
2787 2788 2789
L
H
M
G
F
KN
D
PFig. 2
Fig. 1
Tuotetiedot
| Merkki: | Sonneman |
| Kategoria: | Lamppu |
| Malli: | Stix 2789.16 |
Tarvitsetko apua?
Jos tarvitset apua merkille Sonneman Stix 2789.16 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Lamppu Sonneman Käyttöohjeet
2 Huhtikuuta 2025
2 Huhtikuuta 2025
15 Lokakuuta 2024
15 Lokakuuta 2024
Lamppu Käyttöohjeet
- Lamppu Deko-Light
- Lamppu BenQ
- Lamppu Trio Lighting
- Lamppu AVM
- Lamppu Trust
- Lamppu Olight
- Lamppu Rotolight
- Lamppu Ridem
- Lamppu Maxim
- Lamppu Ranex
- Lamppu Louis Poulsen
- Lamppu Ozito
- Lamppu COLBOR
- Lamppu Schwaiger
- Lamppu Currey & Company
Viimeisimmät Lamppu Käyttöohjeet
8 Huhtikuuta 2025
8 Huhtikuuta 2025
5 Huhtikuuta 2025
5 Huhtikuuta 2025
5 Huhtikuuta 2025
4 Huhtikuuta 2025
4 Huhtikuuta 2025
4 Huhtikuuta 2025
4 Huhtikuuta 2025
4 Huhtikuuta 2025