Sloan G2 Optima Plus Käyttöohje
Sloan
Ei luokiteltu
G2 Optima Plus
Lue alta 📖 käyttöohje suomeksi merkille Sloan G2 Optima Plus (4 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 26 henkilölle ja sai 4.7 tähden keskimäärin 13.5 käyttäjältä
Sivu 1/4
Code No. 0816452
Rev. 6 (02/20)
G2/ECOS/SLOAN SINGLE FLUSH INSTALLATION INSTRUCTIONS FOR
RETROFIT AND COMPLETE VALVE INSTALLATION
LIMITED WARRANTY
Unless otherwise noted, Sloan Valve Company warrants this product, manufactured and sold for commercial or industrial uses, to be free from defects in material and workmanship for
a period of three (3) years (one (1) year for special finishes, SF faucets, PWT electronics and 30 days for PWT software) from the date of first purchase. During this period, Sloan Valve
Company will, at its option, repair, replace, or refund the purchase price of any product which fails to conform with this warranty under normal use and service. This shall be the sole
and exclusive remedy under this warranty. Products must be returned to Sloan Valve Company, at customer’s cost. No claims will be allowed for labor, transportation or other costs.
Damage caused by misuse or improper installation are all excluded from this warranty. This warranty extends only to person or organizations who purchase Sloan Valve Company’s
products directly from Sloan Valve Company for purpose of resale. This warranty does not cover the life of the batteries.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT IS SLOAN VALVE
COMPANY RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY MEASURE WHATSOEVER.
Prior to installing the Optima Plus flushometer, install the items listed below
as illustrated in the Rough-in Diagram. (New installations only.)
• Closet or Urinal fixture
• Drain line
• Water supply line
Important:
• ALL PLUMBING SHOULD BE INSTALLED IN ACCORDANCE WITH
APPLICABLE CODES AND REGULATIONS.
• WATER SUPPLY LINES MUST BE SIZED TO PROVIDE AN
ADEQUATE VOLUME OF WATER FOR EACH FIXTURE.
• WHEN INSTALLING A FLUSHOMETER, IT IS IMPORTANT THAT
THE FLUSH MODEL MATCHES THE REQUIREMENTS OF THE
PLUMBING FIXTURE.
• FLUSH ALL WATER LINES PRIOR TO MAKING CONNECTIONS.
The Optima Plus is designed to operate with 15 to 80 PSI (104 to 552 kPa)
of water pressure. THE MINIMUM PRESSURE REQUIRED TO THE
VALVE IS DETERMINED BY THE TYPE OF FIXTURE SELECTED.
Consult fixture manufacturer for pressure requirements.
Most Low Consumption water closets (1.6 gallon/6 liter) require a minimum
flowing pressure of 25 psi (172 kPa).
8100 Series Complete Flushometer Models
8100 Series G2/ECOS/SLOAN valves are complete
flushometer valves and ideal for new installations.
RESS Series Retrofit Conversion Kit Models
RESS G2/ECOS/SLOAN models are used to convert existing
Royal, Regal and Sloan style flushometers to sensor activation.
G2/ECOS/SLOAN Water Closet Models can be furnished for the
following:
1.1 gpf/4.2 Lpf For High Efficiency Bowls
(ECOS combo unit only)
1.6 gpf/6.0 Lpf For Low Consumption Bowls
2.4 gpf/9.0 Lpf For 9 Liter European Water Closets
3.5 gpf/13.2 Lpf For older Water Closets
G2/ECOS/SLOAN Urinal Models can be furnished for the following:
0.125 gpf/1.9 Lpf For High Efficiency Urinal
(ECOS only)
0.25 gpf/1.9 Lpf For High Efficiency Urinal
(ECOS only)
0.5 gpf/1.9 Lpf For Wash Down Urinals
1.0 gpf/3.8 Lpf For Low Consumption Urinals
1.5 gpf/5.7 Lpf For older Siphon Jet Urinals
3.5 gpf/13.2 Lpf For older Blow Out Urinals
Made in the U.S.A.
PRIOR TO INSTALLATION
TOOLS REQUIRED FOR INSTALLATION
• Slotted screwdriver to adjust control stop.
• Sloan A-50 Super-Wrench™, Sloan A-109 Plier Wrench or smooth jawed
spud wrench for couplings.
• Strap wrench (supplied) to install Optima Plus to valve body.
• 7/64” hex wrench (supplied) to secure Optima Plus cover to base plate.
Tuotetiedot
| Merkki: | Sloan |
| Kategoria: | Ei luokiteltu |
| Malli: | G2 Optima Plus |
Tarvitsetko apua?
Jos tarvitset apua merkille Sloan G2 Optima Plus esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Ei luokiteltu Sloan Käyttöohjeet
2 Huhtikuuta 2025
2 Huhtikuuta 2025
Ei luokiteltu Käyttöohjeet
- Ei luokiteltu FIMI
- Ei luokiteltu Thermador
- Ei luokiteltu Chauvet
- Ei luokiteltu WyreStorm
- Ei luokiteltu WHD
- Ei luokiteltu EA Elektro Automatik
- Ei luokiteltu Moulinex
- Ei luokiteltu ESX
- Ei luokiteltu Creality3D
- Ei luokiteltu Mac Tools
- Ei luokiteltu Klein Tools
- Ei luokiteltu NordicTrack
- Ei luokiteltu Neumann
- Ei luokiteltu Robus
- Ei luokiteltu Hirschmann
Viimeisimmät Ei luokiteltu Käyttöohjeet
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025