Simpson 80271 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Simpson 80271 (3 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 24 henkilölle ja sai 4.8 tähden keskimäärin 12.5 käyttäjältä

Sivu 1/3
1/06/2022 REV 4
Page 1 of 1 80271 Instructions
FNA Group
7152 - 99th Street
Pleasant Prairie, WI 53158
80271 FOAM CANNON INSTRUCTIONS
Set up:
1. Fill the soap bottle (1) with an approved soap.
Troubleshooting:
1. If water leaks from the adapter joints, inspect, clean, and reapply a PTFE seal tape onto the adapter (2) threads if needed.
2. If the foam cannon produces an insufficient amount of foam, be sure:
You are using an approved soap
You are using the correct nozzle for the pressure washer’s PSI rating
The nozzle is clean and free of debris
The Pick up tube assembly screen is clean and clear of debris
For help adjusting, using or troubleshooting your foam cannon, please call our team at 877-362-4271
Tips for use:
1. For optimal foam, the pressure washer should produce no less than 1600 PSI.
2. For best foam results, use only approved soaps.*
3. Follow the soap manufacturer’s recommendations for dilution and use.
4. To prevent chemical damage, be sure to run clean water through the foam cannon assembly for at least 30 seconds
until all parts are rinsed clean.
Components:
1. Soap Bottle
2. Adapter
3. Foam lance (for pressure washers
producing 1600-4000 psi).
4. Pick Up Tube Assembly
1
4
3
2
*NOTICE: To prevent chemical damage to the foam cannon, only use soaps approved for use with pressure washers.

Tuotetiedot

Merkki: Simpson
Kategoria: Ei luokiteltu
Malli: 80271

Tarvitsetko apua?

Jos tarvitset apua merkille Simpson 80271 esitä kysymys alla ja muut käyttäjät vastaavat sinulle