Signature Hardware Bullens 433108 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Signature Hardware Bullens 433108 (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 39 henkilölle ja sai 3.5 tähden keskimäärin 20 käyttäjältä

Sivu 1/2
1Bullens Kitchen Faucet Installation Instructions
INSTALLATION
BULLENS KITCHEN FAUCET INSTALLATION
GETTING STARTED
BEFORE YOU BEGIN
We recommend consulting a professional if you are
unfamiliar with installing plumbing fixtures. Signature
Hardware accepts no liability for any damage to the
faucet, plumbing, sink, counter top, or for personal injury
Observe all local plumbing and building codes.
Unpack and inspect the faucet for shipping damage. If
any damage is found, contact our Customer Relations
team at 1- -855-715
1800.
Note: Make sure to winterize your outdoor faucet
before cold weather arrives to prevent burst pipes and
protect the faucet’s hardware.
Ensure that you have gathered all the required
materials that are needed for the installation.
For these instructions, it is assumed that the old
faucet has been completely removed and any
necessary repairs or modifications to the water
supply have been completed.
*not included
TOOLS AND MATERIALS:
Plumbers
Tape*
Thread
Sealant*
Adjustable
Wrench*
Small
Bucket*
Basin
Wrench*
2. Attach the mounting posts and water lines to the
base of the faucet. Apply plumbers tape or thread
sealant to the threads of the water lines before attach-
ing.
1. Ensure that the water supply below your sink is
completely shut off by turning the shutoff valves all the
way to the right.
Tip: Place a small bucket below your workspace to
catch any water that may drip during the installation
process.
OFF
SKU(s): 433108, 433134
1.855.715.1800

Tuotetiedot

Merkki: Signature Hardware
Kategoria: Ei luokiteltu
Malli: Bullens 433108

Tarvitsetko apua?

Jos tarvitset apua merkille Signature Hardware Bullens 433108 esitä kysymys alla ja muut käyttäjät vastaavat sinulle