Shaws AUSH-4861 Käyttöohje

Shaws Nosturi AUSH-4861

Lue alta 📖 käyttöohje suomeksi merkille Shaws AUSH-4861 (8 sivua) kategoriassa Nosturi. Tämä opas oli hyödyllinen 27 henkilölle ja sai 4.8 tähden keskimäärin 14 käyttäjältä

Sivu 1/8
mm
hole
COLD
IN
HOT
IN
G 1/2”
G 1/2”
G 1/2” to suit
dual check valve
Con-Serv DCCFF
mm
mm
hole
Silverdale
AUSH.4861 - MONOBLOC MIXER
AUSH.4866 - MONOBLOC MIXER WITH SPRAY RINSE
IMPORTERS & DISTRIBUTORS OF FINE KITCHEN AND BATHROOMWARE
 6  |  French Avenue, Brendale QLD 4500 | aftersales@luxebydesign.com.au | www.luxebydesign.com.au
Please Note: This model does not suit incoming water pressure
below 100kPa or higher than 500kPa. The spray rinse model requires
a minimum inlet pressure of 100kPa to successfully divert the water
flow from the main tap to the spray rinse. The stop cocks provided
with this tap contain gauze filters. Please ensure your plumber is
advised of the minimum and maximum water pressure, and to install
the stop cocks as failure to do so voids the tap warranty.
Temperature Range
Min 1°C. Max 70°C
Working Pressure
Min 100kPa (14.5psi). Max 500kPa (72.5psi)
Flow Rates AUSH.
 Bar: L/min
 Bar: L/min
 Bar: L/min
AUSH.6
 Bar: L/min
 Bar: L/min
 Bar: L/min
Ideal performance obtained with equal hot & cold pressures.

Tuotetiedot

Merkki: Shaws
Kategoria: Nosturi
Malli: AUSH-4861

Tarvitsetko apua?

Jos tarvitset apua merkille Shaws AUSH-4861 esitä kysymys alla ja muut käyttäjät vastaavat sinulle