Shark PowerDetect RV2800ZEEU Käyttöohje
Shark
Robottipölynimuri
PowerDetect RV2800ZEEU
Lue alta 📖 käyttöohje suomeksi merkille Shark PowerDetect RV2800ZEEU (21 sivua) kategoriassa Robottipölynimuri. Tämä opas oli hyödyllinen 18 henkilölle ja sai 4.4 tähden keskimäärin 9.5 käyttäjältä
Sivu 1/21
Robot Vacuum
RV2800WD Series
RV2800YE Series
RV2800ZE Series
OWNER’S GUIDE
SELF-EMPTY
NEVERTOUCH
™
sharkclean.com sharkclean.com
GENERAL WARNINGS
When using an electrical appliance, basic
precautions should always be followed,
including the following:
1. The robotic vacuum cleaner system consists
of a robotic vacuum and charging dock with
power supply. These components contain
electrical connections, electrical wiring, and
moving parts that potentially present risk to
the user.
2. Before each use, carefully inspect all parts
for any damage. If a part is damaged,
discontinue use.
3. Use only identical replacement parts.
4. This robotic vacuum cleaner contains no
serviceable parts.
5. Use only as described in this Owner's Guide.
DO NOT use the robotic vacuum cleaner for
any purpose other than those described in
this Owner's Guide.
6. This appliance can be used by children ages
8 years and older and persons with reduced
physical, sensory, or mental capabilities or
lack of experience and knowledge if they
have been given supervision or instruction
concerning use of the appliance in a safe
way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be
made by children without supervision.
7. Children should be supervised to ensure
that they do not play with the appliance.
8. This appliance contains batteries that are
only replaceable by skilled persons.
USE WARNINGS
9. This product has a Class 1 Laser. It is safe
under reasonably foreseeable conditions
(as defined in this Owner's Guide). Always
turn off the power before lifting the
robotic vacuum cleaner or performing any
maintenance on it.
10. DO NOT look directly into laser.
11. DO NOT handle plug, charging dock,
charging cable, or robotic vacuum
cleaner with wet hands. Cleaning and user
maintenance shall not be made by children
without supervision.
12. DO NOT damage the charging cord:
a) DO NOT pull or carry charging dock
by the cord or use the cord as
a handle.
b) DO NOT unplug by pulling on cord.
Grasp the plug, not the cord.
c) DO NOT close a door on the cord,
pull the cord around sharp corners, or
leave the cord near heated surfaces.
13. DO NOT put any objects into nozzle or
accessory openings. DO NOT use with any
opening blocked; keep free of dust, lint, hair,
and anything that may reduce airflow.
14. DO NOT use robotic vacuum cleaner if
airflow is restricted. If the air paths become
blocked, turn the vacuum cleaner off and
remove all obstructions before turning on
the unit again.
15. Keep nozzle and all vacuum openings away
from hair, face, fingers, uncovered feet, or
loose clothing.
16. DO NOT use if robotic vacuum cleaner is not
working as it should, or has been dropped,
damaged, left outdoors, or dropped
into water.
17. DO NOT place vacuum cleaner on
unstable surfaces.
18. DO NOT use to pick up:
a) Liquids.
b) Large objects.
c) Hard or sharp objects (glass, nails,
screws, or coins).
d) Large quantities of dust (drywall dust,
fireplace ash, or embers.)
e) DO NOT use as an attachment to
power tools for dust collection.
f) Smoking or burning objects (hot coals,
cigarette butts, or matches).
g) Flammable or combustible materials
(lighter fluid, gasoline, or kerosene).
h) Toxic materials (chlorine bleach,
ammonia, or drain cleaner).
i) Toxic materials (high concentrations
of chlorine bleach liquid, high
concentrations of ammonia, or drain
cleaning solution).
19. DO NOT use in the following areas:
a) Wet or damp surfaces.
b) Outdoor areas near fireplaces with
unobstructed entrances.
c) Spaces that are enclosed and may
contain explosive or toxic fumes
or vapors (lighter fluid, gasoline,
kerosene, paint, paint thinners,
mothproofing substances, or
flammable dust.)
d) In an area with a space heater.
e) Near fireplaces with
unobstructed entrances.
20. Turn off the robotic vacuum cleaner before
any adjustment, cleaning, maintenance,
or troubleshooting.
21. Allow all filters to air-dry completely before
reinstalling them to prevent liquid from
being drawn into electric parts.
22. DO NOT modify or attempt to repair the
robotic vacuum cleaner or the battery
yourself, except as indicated in this Owner's
Guide. DO NOT use the vacuum if it has
been modified or damaged.
23. Keep fingers clear of wheels and
suspension system at all times while robot
is powered on.
24. DO NOT use any household cleaners (all
purpose cleaners, glass cleaners, bleach)
on any of the polished high gloss surfaces
on the docking station or robot vacuum
cleaner as they contain chemical that may
damage these surfaces. Instead use a cloth
dampened with water to gently clean.
25. This appliance consists of a robotic
vacuum cleaner and charging dock with
power supply. These components contain
electrical connections, electrical wiring, and
moving parts that potentially present risk to
the user.
26. With the exception of some filters and dust
bin, DO NOT expose any parts of the
robotic vacuum cleaner to water or
other liquids.
27. Always turn off the robotic vacuum cleaner
before inserting or removing the filter, dust
bin, or fluid reservoir.
28. DO NOT use the robotic vacuum cleaner
without the dust bin and filter in place.
29. If robotic vacuum cleaner is not starting
from the dock, it must be placed in an
unobstructed circle of 1.5 ft. (45 cm)
away from edges and cliffs.
BATTERY USE
30. The battery is the power source for the
vacuum. Carefully read and follow all
charging instructions.
31. To prevent unintentional starting, ensure the
vacuum is powered off before picking it up
or carrying it.
32. For SHARK® POWERDETECT™ self-empty
dock replacement, use XDRV2800LT,
XDRV2800LX, or equivalent. For SHARK®
POWERDETECT™ NEVERTOUCH
dock replacement, use XDRV2800XL,
XDRV28XL1, or equivalent . For replacement
batteries, use RVBAT85002 (33V)
RVBAT850 (MH1), or RVBAT850 (26V)
battery packs.
33. Keep the battery away from all metal
objects such as paper clips, coins, keys,
nails, or screws. Shorting the battery
terminals together increases the risk of fire
or burns.
34. Under abusive conditions, liquids may be
ejected from the battery. Avoid contact with
this liquid, as it may cause irritation or burns.
If contact occurs, flush with water. If liquid
contacts eyes, seek medical help.
35. Robotic vacuum cleaner should not be
stored, charged, or used at temperatures
below 50°F (10°C) or above 104°F (40°C).
Ensure the battery and vacuum have
reached room temperature before charging
or use. Exposing the robotic vacuum
cleaner or battery to temperatures outside
of this range may damage the battery and
increase the risk of fire.
36. DO NOT expose the robotic vacuum cleaner
or battery to fire or temperatures above
265°F (130°C) as it may cause explosion.
WARNING
To reduce the risk of fire, electric shock, injury, or property damage:
LASER WARNING
THIS PRODUCT HAS A CLASS 1 LASER. IT IS SAFE UNDER REASONABLY FORESEEABLE
CONDITIONS (AS DEFINED IN THESE INSTRUCTIONS.) ALWAYS TURN OFF THE POWER
BEFORE LIFTING THE ROBOTIC VACUUM CLEANER OR PERFORMING ANY MAINTENANCE
ON IT. DO NOT LOOK DIRECTLY INTO LASER.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
If the charging cable plug does not fit fully into the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. DO NOT force into outlet or try to modify to fit.
SAVE THESE INSTRUCTIONS
For the latest warnings and cautions, go to support.sharkclean.com
sharkclean.comsharkclean.com
WHAT'S INCLUDED SET-UP YOUR SHARK® ROBOT & NEVERTOUCH
™
BASE
1. Odor Cartridge Assembly (1X)
3. Robot (1X)
5. Ramp (1X)
5. NeverTouch™ Base (1X)
6. Shark® Multi-Surface Cleaner
12 oz. (355 mL) Bottle (1X)
4. Mopping Pads (quantity varies)
2. Side Brush (2X)
Note: Side brush design may vary.
Some models include a spare.
Note: Not included
on all models
OR
OR
1
Insert Odor Cartridge Assembly
Note: Not included on all models
Note: Make sure the odor cartridge assembly
is installed in the base before using the robot.
ROTATE UNTIL CLICK
INSERT CARTRIDGE
ASSEMBLY INTO BASE
2
Set Up Base
1. Remove all plastic wrap
and foam.
2. Place the base on a flat,
level hard-floor surface
in a location with strong
Wi-Fi signal.
3. Ensure the base is not
placed in area with direct
sunlight.
4. Plug in the base. The
LED will turn green
when it is powered on.
2 ft.
1 ft.
1 ft.
3
Install Ramp On Base
1. Align the flat side of the
ramp with the bottom of
the base.
2. Lift the ramp slightly
above the base, align,
and press down until the
ramp clicks into place.
3. Leave at least 2 ft. of
hard floor space in front
of the base, starting from
the end of the ramp.
5
Attach a Side Brush
to Bottom of Robot
1. The side brush can be
found inside the robot
box.
2. Align the hole in the
brush over the peg on the
bottom of the robot, then
press down on the brush
until it clicks into place.
Side Brush
6
Slide Robot Onto Base
1. Align the robot with the
Shark logo upside down,
then slide it up the ramp,
onto the base.
2. The LEDs on the base
will turn green when the
robot is charging.
3. After 10 to 15 seconds,
the robot will begin to
evacuate dust and debris
into the base.
7
Download & Explore
SharkClean
™
App
or press the Dry icon on your robot
to start a dry clean.
App Features
✔ Mapping
✔ Scheduling
✔ No-Go Zones
✔ Cleaning Reports
4
Fill The Clean Water Tank
1. Lift the water tank o the
front of the base.
2. Add 12 oz. of cleaning
solution. Fill the rest
of the tank with room-
temperature water up
to the MAX fill line, then
reinstall the tank.
Tuotetiedot
| Merkki: | Shark |
| Kategoria: | Robottipölynimuri |
| Malli: | PowerDetect RV2800ZEEU |
Tarvitsetko apua?
Jos tarvitset apua merkille Shark PowerDetect RV2800ZEEU esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Robottipölynimuri Shark Käyttöohjeet
27 Helmikuuta 2025
Robottipölynimuri Käyttöohjeet
- Robottipölynimuri Medion
- Robottipölynimuri Cecotec
- Robottipölynimuri Mamibot
- Robottipölynimuri Rowenta
- Robottipölynimuri Samsung
- Robottipölynimuri Irobot
- Robottipölynimuri Prosenic
- Robottipölynimuri Grundig
- Robottipölynimuri Viomi
- Robottipölynimuri Ezviz
- Robottipölynimuri Eufy
- Robottipölynimuri Electrolux
- Robottipölynimuri Hoogo
- Robottipölynimuri Bissell
- Robottipölynimuri Heinner
Viimeisimmät Robottipölynimuri Käyttöohjeet
8 Huhtikuuta 2025
1 Huhtikuuta 2025
29 Maaliskuuta 2025
29 Maaliskuuta 2025
24 Maaliskuuta 2025
18 Maaliskuuta 2025
12 Maaliskuuta 2025
12 Maaliskuuta 2025
26 Helmikuuta 2025
20 Helmikuuta 2025