Senseca GE114 Käyttöohje
Senseca
Mittauslaitteet
GE114
Lue alta 📖 käyttöohje suomeksi merkille Senseca GE114 (12 sivua) kategoriassa Mittauslaitteet. Tämä opas oli hyödyllinen 16 henkilölle ja sai 4.7 tähden keskimäärin 8.5 käyttäjältä
Sivu 1/12
Z03.0.0X.6C-13
Operating Manual
pH electrodes
GE xxx
Keep for later use.
www.senseca.com
English
Z03.0.0X.6C-13 Operating manual GE xxx serie page 2 of 12
Index
1 GENERAL NOTE ...................................................................................................................................... 2
2 SAFETY ....................................................................................................................................................... 2
2.1 INTENDED USE ........................................................................................................................................ 2
2.2 SAFETY GUIDELINES ................................................................................................................................ 3
2.3 SAFETY SIGNS AND SYMBOLS .................................................................................................................. 3
2.4 FORESEEABLE MISUSE ............................................................................................................................. 4
2.5 SAFETY INSTRUCTIONS ............................................................................................................................ 4
3 BASICS ........................................................................................................................................................ 6
3.1 PH MEASUREMENT .................................................................................................................................. 6
3.2 DESIGN OF ELECTRODE ............................................................................................................................ 6
3.3 FURTHER INFORMATION .......................................................................................................................... 7
3.4 SERVICE LIFE ........................................................................................................................................... 7
4 OPERATING AND MAINTENANCE ..................................................................................................... 7
4.1 MEASURING AND STORING ...................................................................................................................... 7
4.2 CALIBRATION .......................................................................................................................................... 8
4.3 CARE AND MAINTENANCE ....................................................................................................................... 9
5 CHOOSE THE RIGHT ELECTRODE.................................................................................................. 10
6 RESHIPMENT AND DISPOSAL ........................................................................................................... 11
6.1 RESHIPMENT ......................................................................................................................................... 11
6.2 DISPOSAL .............................................................................................................................................. 11
7 MANUFACTURER / DISTRIBUTER ................................................................................................... 11
8 SPECIFICATION ..................................................................................................................................... 12
1 General Note
Read this document carefully and get used to the operation of the product before you use it. Keep
this document within easy reach near the product for consulting in case of doubt.
2 Safety
2.1 Intended Use
The pH electrodes must be used only according to its intended purpose and under suitable conditions.
The electrodes must be operated with suitable measuring devices and be calibrated before first use
and afterwards in regular intervals.
The safety requirements (see below) have to be observed.
The life-time and accuracy of the electrodes depends on adequate selection as well as on proper
handling. Please consider therefore the chapters “Choose the right electrode”, “Measuring and storing”
and “Maintenance”.
Use the device carefully and according to its technical data (do not throw it, strike it, etc.). Protect
the device from dirt.
To be sure that there´s no risk arising due to misinterpretation of measured values, the operator
must have further knowledge in case of doubt - the user is liable for any harm/damage resulting
from misinterpretation due to insufficient knowledge.
Z03.0.0X.6C-13 Operating manual GE xxx serie page 3 of 12
The manufacturer will assume no liability or warranty in case of usage for other purpose than the
intended one, ignoring this manual, operating by unqualified staff as well as unauthorized
modifications to the device.
2.2 Safety guidelines
This device has been designed and tested in accordance with the safety regulations for electronic
devices.
However, its trouble-free operation and reliability cannot be guaranteed unless the standard safety
measures and special safety advises given in this manual will be adhered to when using the
device.
2.3 Safety signs and symbols
The following signs in this document highlight warnings:
Caution! This symbol warns of imminent danger, death, serious injuries and
significant damage to property at non-observance.
This symbol indicates danger for living tissue as well as a variety of materials,
which can be damaged or destroyed when coming into contact with this
chemical. Caustic effect, protective equipment required!
This Symbol indicates dangers to all living beings that may result in death or
acute or chronic health hazards when inhaled, swallowed, or absorbed
through the skin of this chemical.
This Symbol indicates irritant substances that can cause inflammation on
short-term, prolonged or repeated contact with the skin or mucous
membranes.
Attention! This symbol warns of possible dangers or dangerous situations
that can provoke damage to the device or environment at non-observance.
Note! This symbol point out processes which can indirectly influence
operation, possibly cause incorrect measurement or provoke unforeseen
reactions at non-observance.
This symbol instructs the use of eye protection which protects the eyes from
harmful influences when working with powerful light, UV radiation, laser,
chemicals, dust, splinters or weather influences.
This symbol instructs the use of protective gloves which offer protection from
mechanical, thermal, chemical, biological or electrical hazards.
Tuotetiedot
| Merkki: | Senseca |
| Kategoria: | Mittauslaitteet |
| Malli: | GE114 |
Tarvitsetko apua?
Jos tarvitset apua merkille Senseca GE114 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Mittauslaitteet Senseca Käyttöohjeet
28 Helmikuuta 2025
28 Helmikuuta 2025
28 Helmikuuta 2025
28 Helmikuuta 2025
28 Helmikuuta 2025
Mittauslaitteet Käyttöohjeet
- Mittauslaitteet Flex
- Mittauslaitteet Megger
- Mittauslaitteet Ermenrich
- Mittauslaitteet Chauvin Arnoux
- Mittauslaitteet Stamos
- Mittauslaitteet Techno Line
- Mittauslaitteet BAXTER
- Mittauslaitteet Fluke
- Mittauslaitteet Basetech
- Mittauslaitteet Rigol
- Mittauslaitteet IFM
- Mittauslaitteet Metrel
- Mittauslaitteet Helvi
- Mittauslaitteet MSW
- Mittauslaitteet Megasat
Viimeisimmät Mittauslaitteet Käyttöohjeet
3 Huhtikuuta 2025
3 Huhtikuuta 2025
3 Huhtikuuta 2025
3 Huhtikuuta 2025
3 Huhtikuuta 2025
3 Huhtikuuta 2025
3 Huhtikuuta 2025
3 Huhtikuuta 2025
3 Huhtikuuta 2025
3 Huhtikuuta 2025