Seima SLC-600B Käyttöohje
Lue alta 📖 käyttöohje suomeksi merkille Seima SLC-600B (1 sivua) kategoriassa Pesuallas. Tämä opas oli hyödyllinen 23 henkilölle ja sai 5.0 tähden keskimäärin 12 käyttäjältä
                        Sivu 1/1
                    
                    
                    
seima.com.au
Please note
 −All measurements are in millimetres.
 −Use silicone sealant. Do not use epoxy type adhesives.
 −Specifications may vary without notice as part of our continuous improvement practices.
 −Clean with a damp cloth. Do not use abrasive cleaners, liquids or pastes.
tilos-in  |  v 3.1
The door is held in place by a   with long metal pin
a bend at the top. 
To reverse the door opening, the pin can be 
swapped to the other side of the cabinet.
Recommended tool: 
long nose pliers
Instructions
1  First, remove the sink from the cabinet 
to access the door pin from inside the 
cabinet.
2  Remove the long pin to free the door.
3  Unscrew the magnetic door closures 
and refasten these on the other side of 
the door opening.
4  Reverse the door, and re-thread the 
pin on the other side. See threading 
sequence above.
How to reverse the door opening
Threading sequence
The pin is threaded in the following sequence: 
1   Through the hole in the frame at the top of the 
unit door opening
2   Then through the holes in the door
3  Then into a small washer 
4  Then finally into the hole in the metal ‘L’ 
bracket at the base of the unit
Important notes
The washer must be placed between the door and 
metal ‘L’ bracket at the base of the unit.
The magnetic door closures need to be transferred 
to the other side of the cabinet.
Door
Threading sequence for metal pin:
Transfer magnetic 
door closures
Installation Guide
Tilos Laundry Unit
Door 
interior
Tuotetiedot
| Merkki: | Seima | 
| Kategoria: | Pesuallas | 
| Malli: | SLC-600B | 
Tarvitsetko apua?
Jos tarvitset apua merkille Seima SLC-600B esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Pesuallas Seima Käyttöohjeet
                        
                         1 Tammikuuta 2025
                        
                    
                                                            Pesuallas Käyttöohjeet
- Pesuallas Alfi
- Pesuallas Allibert
- Pesuallas Fulgor Milano
- Pesuallas ProFlo
- Pesuallas Whitehaus
- Pesuallas Rohl
- Pesuallas Dxv
- Pesuallas Kernau
- Pesuallas Signature Hardware
- Pesuallas Kohler
- Pesuallas Physa
- Pesuallas Oliveri
- Pesuallas Deante
- Pesuallas Atosa
- Pesuallas Blanco
Viimeisimmät Pesuallas Käyttöohjeet
                        
                         8 Huhtikuuta 2025
                        
                    
                                                            
                        
                         8 Huhtikuuta 2025
                        
                    
                                                            
                        
                         7 Huhtikuuta 2025
                        
                    
                                                            
                        
                         2 Huhtikuuta 2025
                        
                    
                                                            
                        
                         31 Maaliskuuta 2025
                        
                    
                                                            
                        
                         30 Maaliskuuta 2025
                        
                    
                                                            
                        
                         26 Maaliskuuta 2025
                        
                    
                                                            
                        
                         4 Maaliskuuta 2025
                        
                    
                                                            
                        
                         25 Helmikuuta 2025
                        
                    
                                                            
                        
                         31 Tammikuuta 2025