Schimmel-DRY EDH-WHI-SDRY-M2 Käyttöohje

Schimmel-DRY Ilmankuivain EDH-WHI-SDRY-M2

Lue alta 📖 käyttöohje suomeksi merkille Schimmel-DRY EDH-WHI-SDRY-M2 (2 sivua) kategoriassa Ilmankuivain. Tämä opas oli hyödyllinen 21 henkilölle ja sai 4.5 tähden keskimäärin 11 käyttäjältä

Sivu 1/2
Warranty and processing
The warranty/guarantee for the Schimmel-DRY is 2 years from the date of delivery
and relates exclusively to the proper heating of the heating elements. The warranty
includes the repair or exchange of the defective individual component and will be
processed after the damage has been reported in accordance with the general
terms and conditions of your dealer.
In the event of a malfunction, check which of your heating elements is affected by
directly plugging in each heating element (with a connection cable of the same
construction), or see whether the defect is caused by the mains cable or the
connection cable. No liability is assumed for possible contamination of surfaces in
the area of the heating elements due to soot, dust or other chemical influences, as
well as discolouration of surfaces due to the effects of heat. In the event of damage
to the device due to incorrect or unsafe installation or incorrect operation, all
warranty claims are forfeited.
The manufacturer assumes no responsibility for direct or indirect damage and
costs (e.g., shipping, installation, energy expenditure, heating failure, heat
exposure, damage, soiling) that may arise as a result of use or the non-observance
of these instructions, or from improper use. Damage caused by breakage of the
heating plate is only covered by the warranty if it can be proven beyond any doubt
that the breakage is due to a material or functional defect in the heating element.
We recommend checking with your household insurance provider to ensure that
surface units are included in your insurance against breakage of the heating
surface.
Prevention and protection
As with every technical device, contact with liquids (water), dust or dirt and an
excessively high operating temperature should also be avoided with the Schimmel-
DRY in order to avoid malfunctions or consequential damage.
Radiant heat that can be used to dry out the wall is available from a heating plate
surface temperature of approx. 55°C. In the case of an uninterrupted power supply,
a surface temperature of 70 to max. 80°C should not be exceeded. If the
temperature is higher, this indicates a malfunction of the heating element or
insufficient ventilation.
Permanent mould solution.
We wish you a lot of
happiness, dry walls and
healthy indoor air with the
Schimmel-DRY.
Positioning mounted directly.
Positioning with stand.
Technical specifications
Dimensions:
Length: 520 mm, width: 90 mm
Depth: 1618 mm (46 mm stone-ceramic composite + 12 mm console)
Model name:
EGS-WHI-GL
Colour:
White
Rated power per heating element:
4550 watts (2 heating elements: 7090 watts)
Rated voltage/frequency:
230 volt/50 Hz
Weight per heating element:
approx. 500 g
Surface temperature:
approx. 5570°C
Controls:
None when connected directly; optional timer switch
Protection class:
Heating element: IP 54 (protected against dust and spraying water) Plug
connections: IP 50 (protected against dust and accidental contact)
Power connection:
Optional length: 75200 cm/cross-section: 2 x 0.75 mm
2
Euro plug to IEC
connector C7
Connection between 2 heating elements:
Optional length: 20200 cm/cross-section: 2 x 0.75 mm
2
IEC connector C8 to
IEC connector C7
Surface:
High-quality, mechanically resistant composite heating plate with ideal
radiation properties, washable
Rear:
Temperature-resistant paint, solvent-free, resistant to conventional solvent-
free and acid-free household cleaners with an alcohol content of up to 5%
Packaging units available:
1 x EGS-WHI-GL heating element, 1 power cord
1 x EGS-WHI-GL heating element, 1 connection cable
2 x EGS-WHI-GL heating elements, 1 power cord + 1 connection cable
With fastening material in each case
Electrical capacity:
Up to 5 heating elements of 4050 watts per connection cable
Mechanical resistance:
Avoid mechanical stress
Customer service and
information:
ELIAS Heiztechnik GmbH, Unterbruckendorf 14 9314
Launsdorf, Austria
Tel: +43 (0) 4212/467 15
Email: info@schimmel-dry.com
Website: www.schimmel-dry.com
INSTRUCTION MANUAL
PLEASE BE SURE TO FOLLOW THE INSTALLATION,
USAGE AND SAFETY INSTRUCTIONS!
The device is designed for continuous operation or operation at intervals (e.g.,
timer switch) via connection via a socket.
Do not cover the heating elements with textiles or other materials.
Air must be able to circulate freely around the heating elements to prevent
heat build-up and possible overheating.
No liability is accepted for damage to the device or affected objects and
surfaces, or for any consequential damage resulting from non-compliance
with these guidelines.
In the event of improper use, all warranty claims are void.
This manual describes how to install and operate the Schimmel-DRY heating
elements. It is for information only and is subject to change without notice.
Please read this manual first, so that you can familiarise yourself with all the
product's properties before you start using it.
Manufacturer's declaration of conformity (CE)
This equipment has been designed and manufactured in accordance with the
following standards relating to the European Community low voltage regulations:
EN 60335-1 (Single layer insulation, general part), EN 60335-2-30 (Particular
requirements for space heaters) and EN 62233 (Low voltage directive).
Properties and benefits of use
Congratulations on purchasing Schimmel-DRY heating elements. As a company,
we guarantee the quality and safety of this product. The following sections
explain how to use the device and provide useful information for a better
understanding and the best possible use of its properties.
Permanent mould solution.

Tuotetiedot

Merkki: Schimmel-DRY
Kategoria: Ilmankuivain
Malli: EDH-WHI-SDRY-M2

Tarvitsetko apua?

Jos tarvitset apua merkille Schimmel-DRY EDH-WHI-SDRY-M2 esitä kysymys alla ja muut käyttäjät vastaavat sinulle