Rocstor Y10G002-B1 Käyttöohje

Rocstor AV-laajennus Y10G002-B1

Lue alta 📖 käyttöohje suomeksi merkille Rocstor Y10G002-B1 (2 sivua) kategoriassa AV-laajennus. Tämä opas oli hyödyllinen 32 henkilölle ja sai 4.6 tähden keskimäärin 16.5 käyttäjältä

Sivu 1/2
Introduction
Package Contents
Installation Requirements
Panel Description
User Manual
Y10G002-B1
®
HDMI EXTENDER
HDMI Extender over single Cat 5/6
TrueReach
The Rocstor TrueReach HDMI extender, extends the transmit length of
HDMI Visual/Audio up to 120m(394ft) with single network cable. Supports
IR signal transmission, to control media playback of the signal source
device at the display location.
2. HDMI display device like SDTV, HDTV, projector with HDMI port.
3. Network cables: UTP/STP CatSe/6 network cables, which following
the standard of IEEE-568B.
Transmission length: CATS 260ft (80m)/CATSE 328ft (100m)/CAT6 393ft
(120m).
1. Do not mix up the HDMI EXTENDER sender and HDMI EXTENDER
receiver, and the IR blaster and IR receiver.
2. Do not plug-in/out the cables ,when it is in use.
3. Use DC SV power supply only.
1. HDMI source device (computer graphics card, DVD,PS3, HD
monitoring equipment etc).
Note: above accessory content is regular package for a kit. If purchased HDMI
extender TX or HDMI extender RX separately, the package contents would be
dierent.

Tuotetiedot

Merkki: Rocstor
Kategoria: AV-laajennus
Malli: Y10G002-B1

Tarvitsetko apua?

Jos tarvitset apua merkille Rocstor Y10G002-B1 esitä kysymys alla ja muut käyttäjät vastaavat sinulle