Proaim FF-FCBE-01 Käyttöohje
Proaim
Ei luokiteltu
FF-FCBE-01
Lue alta 📖 käyttöohje suomeksi merkille Proaim FF-FCBE-01 (5 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 6 henkilölle ja sai 4.4 tähden keskimäärin 3.5 käyttäjältä
Sivu 1/5

Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Focus Bee Follow Focus (FF FCBE- -01)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
What s In The Box’
A s s e m b ly Ma n u a l
15mm Lightweight Core Bridge Focus Hand Wheel
Swing Arm with Drive Gear 35
Teeth knob Pouch
Drive Gear 43 Teeth
2.5mm Allen Key

2
• Loosen the knob of the Focus Hand Wheel
and aach the Core Bridge to it.
Feature: The lightweight core bridge transfers
the focus movement from the handwheel
mounted on your core bridge to the drive gear
that interfaces with your lens.
• Aer aaching the Core Bridge, properly
secure it using the knob.
• Loosen the Drive Gear and remove it.
Note: Get slip free movement with -
interchangeable drive gear, as both gears can
be conveniently mounted on either side of the
Swing Arm.
Follow Focus Setup
• Aach the Swing Arm to the Core Bridge
and secure it using the knob as shown in
the image.
Feature: The Swing Arm has a 1:1.842 gear
rao, enabling wide and smooth focus
adjustments.
Focus Hand Wheel Tension Adjustment
• Loosen the inbuilt grub screw of 15mm
Lightweight Core Bridge with the help of
Allen key and then adjust the focus hand
wheel accordingly.
• Focus hand wheel can be adjust with the
help of the grub screw provided in the core
bridge as shown in the picture.

3
Feature: 43 Teeth Drive Gear has a ner gear
rao than 35 Teeth Drive Gear, allowing the
operator to focus more precisely, especially
when working with lenses with narrow eld
depth.
• Press the locking lever aer mounng on
the rod and lock the posion.
• The movement of the Handwheel can be
adjusted by loosening the knob of the Swing
Arm.
• The movement of the Swing Arm can be
adjusted by loosening its tension adjust-
ment roller knob.
• Aer adjusng the posion of the Core
Bridge, lock the desired posion by
ghtening the knob.
Feature: The Swing Arm features a built in -
tension adjustment roller that applies slight
pressure or tension on the gear mechanism to
eliminate unwanted movement in the focus
gear.
• Mount the Follow Focus on the rod through
the Core Bridge.
Feature: 35 Teeth Drive Gear delivers a
slightly faster and less sensive focus control,
making it useful for wide angle lenses, -
especially in fast paced shoong scenarios.-
• Remove the 35 Teeth Gear and aach the
43 Teeth Gear to the Swing Arm.
Tuotetiedot
Merkki: | Proaim |
Kategoria: | Ei luokiteltu |
Malli: | FF-FCBE-01 |
Tarvitsetko apua?
Jos tarvitset apua merkille Proaim FF-FCBE-01 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Ei luokiteltu Proaim Käyttöohjeet
2 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
31 Tammikuuta 2025
29 Tammikuuta 2025
21 Tammikuuta 2025
26 Joulukuuta 2024
26 Joulukuuta 2024
Ei luokiteltu Käyttöohjeet
- Ei luokiteltu Emerson
- Ei luokiteltu Domo
- Ei luokiteltu Y-brush
- Ei luokiteltu EnOcean
- Ei luokiteltu Tru Components
- Ei luokiteltu Götze & Jensen
- Ei luokiteltu 4ms
- Ei luokiteltu Nordic Winter
- Ei luokiteltu On-Q
- Ei luokiteltu Proviel
- Ei luokiteltu BASSBOSS
- Ei luokiteltu RIX
- Ei luokiteltu Vantec
- Ei luokiteltu KJB Security Products
- Ei luokiteltu Sesame Street
Viimeisimmät Ei luokiteltu Käyttöohjeet
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025