Pro-Ject Stereo Box E Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Pro-Ject Stereo Box E (12 sivua) kategoriassa Hifi järjestelmä. Tämä opas oli hyödyllinen 17 henkilölle ja sai 4.8 tähden keskimäärin 9 käyttäjältä

Sivu 1/12
INSTRUCTIONS FOR USE
Pro-Ject Stereo Box E
© Pro-Ject Audio Systems Stereo Box E · Revision . .2024 · 31 05
2
Dear music lover,
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
Safety instructions
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the
voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to disconnect the unit from the mains. Make sure that the power supply is easily
accessible at all times. Never handle the device, the power supply while your hands are wet or damp.
Avoid letting liquids enter the device or the power supply. Never place any item containing liquid, such
as a flower vase on or near the device. Never spill any liquid on the device or the power supply.
Never place any naked flame sources, such as lighted candles on or near the device. The product shall not
be used in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.
Connectors
Make all connections whilst the amplifier is disconnected from the power supply.
Take care to connect the left and right channels correctly. The right channel is usually marked red, the
left channel black or white.
Never use any other power supply than the one supplied with the unit.

  
  
 
   
 



 
 





© Pro-Ject Audio Systems Stereo Box E · Revision . .2024 · 31 05
3
Phono input
Connect the tonearm signal lead to the In 1
In 1
In 1
In 1 In 1 Phono
Phono
Phono
PhonoPhono of the amplifier. The earthing wire may be connected to the
screw terminal if you encounter hum problems when using the turntable. The phono input is suitable for MM
and High-Output MC cartridges.
Line inputs
Line level sources (e.g. CD player, radio or TV) can be connected to the RCA input marked and 3,5mm
In 2
In 2
In 2
In 2In 2
TRS input marked In 3.
.
.
. .
Digital inputs
Sources with a digital output such as TV satellite/cable receiver or a game console can be connected to the
digital inputs. Coaxial to and optical to and
In
In
In
In In 4
4
4
44 I
I
I
IIn 5
n 5
n 5
n 5n 5 In 6
In 6
In 6
In 6In 6
.
.
.
. .
Sub out
A active subwoofer can be connected to the output sockets marked . n Sub
Sub
Sub
SubSub o
o
o
oout
ut
ut
utut
Connection to the speakers
The output terminals accept loudspeaker cables terminated with 4mm Banana plugs, spades connectors
or naked wire.
USB 5V/1A output
The USB C output on the back can be used to supply modern streaming devices (for example a Stream Box
S2, or many other manufacturer’s devices) with power.
You can use the included USB C to USB A adapter to use USB A power cables that are commonly
included with many products.
Mains power connection
Connect the low voltage plug from the power supply to the socket of the amplifier before
P
P
P
PPower
ower
ower
ower ower V
V
V
V V
20
20
20
2020 DC
DC
DC
DCDC
connecting the power supply to the mains.
Front panel controls
To switch on from standby or to standby
The push button on the left side of the front panel turns the unit on or back into standby. The blue LED above
the stand-by push button shows that the unit is switched on.
Input selector
Press the push button next to the 7 input LEDs to switch between the inputs. Selected input number will be
illuminated.
 
 




Tuotetiedot

Merkki: Pro-Ject
Kategoria: Hifi järjestelmä
Malli: Stereo Box E

Tarvitsetko apua?

Jos tarvitset apua merkille Pro-Ject Stereo Box E esitä kysymys alla ja muut käyttäjät vastaavat sinulle