Peerless-AV PAP-SANYO-ST1 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Peerless-AV PAP-SANYO-ST1 (1 sivua) kategoriassa Projektorin lisävaruste. Tämä opas oli hyödyllinen 28 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

ISSUED: 10-31-08 SHEET #: 056-9012-1

Visit the Peerless Web Site at www.peerlessmounts.comFor customer care call 1-800-729-0307 or 708-865-8870.

1 of 1

FRONT

FRONT

Note: Actual parts may appear slightly dierent than illustrated.

Installation and Assembly - Projector Adapter Plate

Models:PAP-SANYO-ST1, PAP-SANYO-ST1-S,

PAP-SANYO-ST1-W

© 2008 Peerless Industries, Inc. All rights reserved.

Peerless is a registered trademark of Peerless Industries, Inc.

IMPORTANT! Read entire instruction sheet before you

start installation and assembly.

Before you start check the parts list below to make sure all

of the parts shown are included.

•Installer must verify that the supporting surface will

safely support the combined weight of all attached

equipment and hardware.

WARNING

1

PROJECTOR

*Notch indicates front of projector.

Attach adapter plate (A) to projector using

four M4 x 8 mm socket pin serrated washer

head screws (B). Tighten using 4 mm allen

wrench (C).

*

B

A

BAC

B

B

SANYO-ST1SANYO-ST1-SSANYO-ST1-W

Qty

.

Part #Part #Part #

Aadapter plate1055-1878055-4878055-2878

BM4 x 8 mm socket pin serrated washer head screw 4510-1005510-2005510-2005

C4 mm allen wrench 1560-9646560-9646560-9646

Parts List

Description

Tuotetiedot