Oricom Rock Light Käyttöohje

Oricom Ei luokiteltu Rock Light

Lue alta 📖 käyttöohje suomeksi merkille Oricom Rock Light (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 18 henkilölle ja sai 4.6 tähden keskimäärin 9.5 käyttäjältä

Sivu 1/2
User Guide
Rock Light
For the full Product and Warranty Information, please scan QR code or
visit www.oricom.com.au
Need help? Contact Oricom Support
If you need assistance setting up or using your Oricom product now or in the
future, call Oricom Support.
Australia (02) 4574 8888
Mon-Fri 8am – 6pm AEST
New Zealand 0800 67 42 66
Mon-Fri 10am – 8pm NZST
Specifications:
LED POWER: 5W
LED Qty per fitting: 3pcs
Lumens: 428Lm (Real lumen)
Voltage: 9-24V
IP Rating: IP68, IP69K
Nuts and bolts: stainless steel
Length of cables: 1.5M
Operating temperature: -40°C~145°C
Pack Contents:
1 x Rock light
1 x Standard base with stainless bolts, lock nuts and washers
1 x User guide
Mounting and Installation:
The most common areas to install Oricom Rock Lights, include; Sides of
vehicle, under sills, front and rear corners, underneath trays, inside boot or
bonnet compartment, roof racks etc.
Once you have established where the rock lights are to be installed, secure
them in place, then secure the wires, and connect the red power input wire to
the positive battery/power terminal. Connect the black ground wire to the
negative battery terminal or a factory grounding point. If you choose to use a
switch you will need to route the wiring via the switch before connecting to
power.
Standard Base Mounting Bolt

Tuotetiedot

Merkki: Oricom
Kategoria: Ei luokiteltu
Malli: Rock Light

Tarvitsetko apua?

Jos tarvitset apua merkille Oricom Rock Light esitä kysymys alla ja muut käyttäjät vastaavat sinulle