NUVO Surrey 60/4142 Käyttöohje

NUVO Helpotus Surrey 60/4142

Lue alta 📖 käyttöohje suomeksi merkille NUVO Surrey 60/4142 (2 sivua) kategoriassa Helpotus. Tämä opas oli hyödyllinen 21 henkilölle ja sai 4.7 tähden keskimäärin 11 käyttäjältä

Sivu 1/2
ASSEMBLY INSTRUCTION
SKU#60/4142, 60/4162
NOTE: Please consult a qualied electrician if you are not certain of the installation or service.
CAUTION: Before starting the installation or service, disconnect the power by turning o the circuit
breaker or by removing the fuse at the fuse box.
1. Carefully unpack the xture, lay out all parts on a clean surface.
2. Fasten the cross bar onto the outlet box by using provided 2 outlet box screws.
3. Tie ground wire from outlet box and from xture to the ground screw on the cross bar. Connect white wire
(live wire) from supply circuit. Cover connections using provided wire connectors.
4. Place the xture body to the wall by aligning the protruding mounting screws all the way through the wall
plate and tighten lock nuts to the mounting screws until the xture body is held rmly against the wall.
5. Unscrew the socket rings from the sockets. Place the shades over the sockets, refasten the socket rings to
secure the shade.
6. Install the bulbs ot included). (N
7. Turn on the power. This xture can be installed as an up-light or down-light position. a
A Satco Product

Tuotetiedot

Merkki: NUVO
Kategoria: Helpotus
Malli: Surrey 60/4142

Tarvitsetko apua?

Jos tarvitset apua merkille NUVO Surrey 60/4142 esitä kysymys alla ja muut käyttäjät vastaavat sinulle