NUVO Bento 60/4084 Käyttöohje

NUVO Helpotus Bento 60/4084

Lue alta 📖 käyttöohje suomeksi merkille NUVO Bento 60/4084 (2 sivua) kategoriassa Helpotus. Tämä opas oli hyödyllinen 14 henkilölle ja sai 3.8 tähden keskimäärin 7.5 käyttäjältä

Sivu 1/2
ASSEMBLY INSTRUCTION
SKU#60/4 3, 60/ 08 4084
NOTE: Please consult a qualied electrician if you are not certain of the installation or service.
CAUTION: Before starting the installation or servi , disconnect the power by turning o the circuit ce
breaker or by removing the fuse at the fuse box.
1. Carefully unpack the xture, lay out all parts on a clean surface.
2. Fasten the mounting ring onto the outlet box by using provided 2 outlet box screws.
3. Tie ground wire from outlet box and from xture to the ground screw on the mounting ring. Connect white
wire (live wire) from supply circuit. Cover connections using provided wire connectors.
4. Place the xture body to the wall by aligning the protruding mounting screws all the way through the wall
plate and tighten lock nuts to the mounting screws until the xture body is held rmly against the wall.
5. Unscrew the socket rings and socket covers from the sockets. Place the shades and socket covers over the
sockets, refasten the socket rings to secure them.
6. Install the bulbs ot included). (N
7. Turn on the power. This xture can be installed as an up-light or down-light position. a
A Satco Product

Tuotetiedot

Merkki: NUVO
Kategoria: Helpotus
Malli: Bento 60/4084

Tarvitsetko apua?

Jos tarvitset apua merkille NUVO Bento 60/4084 esitä kysymys alla ja muut käyttäjät vastaavat sinulle