NUVO 62/873 Käyttöohje

Sivut 1 Engels Helpotus

Lue käyttöohje merkille NUVO 62/873 ilmaiseksi verkossa tai lataa PDF. Ohje on ollut hyödyllinen 38 henkilölle. Kysyttävää mallista? Esitä kysymys

Installation Instructions

ITEM NO. :

62/871. 62/872. 62/873. 62/874. 62-875. 62-876

1. Shut o main power at circuit breaker before attempting to install

luminaire.

2. Install mounting plate to junction box in ceiling using mounting

screws.

3. Secure the two screws to the mounting plate. You should leave the

proper length of the two screws beyond the surface of the mounting

plate to ensure enough thread is available to properly mount the

canopy with the Mounting Screws.

4. Pull the existing electrical wires out of the junction box and make

proper connections using wire nuts.

5. Position canopy over mounting plate and align holes in canopy with

mounting screws . With thread protruding through canopy surface,

thread and secure four screws.

INSTALLATION

Use UL listed wire connectors for connections.

WARNING

Turn o the main power at the circuit breaker

before installation,replacing lamp or maintenance.

Installation must be performed by a qualied

electrician.

To ensure the success of the installation,be sure

to read these instructions and review the diagrams

thoroughly before beginning.

J-Box

Wire nuts

Canopy

Mounting Plate

Arvostele tämä ohje

Tuotetiedot

Jos tarvitset apua merkille NUVO 62/873 esitä kysymys alla ja muut käyttäjät vastaavat sinulle