Mount-It! MI-509B Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Mount-It! MI-509B (7 sivua) kategoriassa Wandsteun. Tämä opas oli hyödyllinen 11 henkilölle ja sai 4.8 tähden keskimäärin 6 käyttäjältä

Sivu 1/7
TV CEILING MOUNT
MI-509B
MI-509L
Thank you for choosing Mount-It
2
Mount-It!
Mount-It!
4
Using a stud finder locate the center of the ceiling joist or angled wall stud. Center the Mounting
Template (#I) on the stud and mark the center of the holes with a pencil.
Drill pilot holes on the marked locations using a 3/16” drill bit to a depth of 2.2”. Attach Ceiling Bracket
(#A) to the drilled holes using Lag Screws (#W-A) and Washers (#W-C) and tighten until secure.
Allow the pole to hang freely downward and then tighten the lower nut and bolt on the bracket (pictured
below) by tightening the nut clockwise with Wrench (#G), holding the bolt in place on the other end with
Allen Wrench (#H).
Note: In addition to normal ceiling mounting, this product may be mounted to angled ceiling
surfaces or to the side of an exposed joist at a maximum of a 90° angle.
Mounting to a Wood Stud or Joist
Step 1a Step 1b

Tuotetiedot

Merkki: Mount-It!
Kategoria: Wandsteun
Malli: MI-509B

Tarvitsetko apua?

Jos tarvitset apua merkille Mount-It! MI-509B esitä kysymys alla ja muut käyttäjät vastaavat sinulle