Marklin 43303 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Marklin 43303 (4 sivua) kategoriassa Mallin rakentaminen. Tämä opas oli hyödyllinen 15 henkilölle ja sai 4.4 tähden keskimäärin 8 käyttäjältä

Sivu 1/4
43300/43303
Der Steuerwagen kann mit der Innenbeleuchtung
73150 ausgerüstet werden. Bitte beachten Sie folgende
Abweichungen zur Einbau-Anleitung von 73150:
Zum Öffnen des Wagens wird nur der eine Gummi
-
wulst abgezogen (73150 - Seite 2).
Die Elektronik bleibt montiert.
montiert (73150 - Seite 3, 6, 7).
Die zweipolige Leitung im Wagen wird am Steck-
Kontakt aufgetrennt.
Der zweipolige Stecker wird an einem Ende der
Beleuchtung eingesteckt (73150 - Seite 9).
Die zweipolige Muffe wird mit den hinter dem Füh
-
rerstand beigelegten Zwischensteckern am anderen
Ende der Beleuchtung eingesteckt (73150 - Seite 9).
Das Kontaktblech an den Enden der Beleuchtung
wird nicht montiert (73150 - Seite 10).
This cab control car can be equipped with the 73150
lighting kit. Please note the following changes in the
installation instructions for the 73150 lighting kit for
these cars:
Only the one corridor connection at the end of
- page 2).
The electronic circuit board does not need to be
removed; it should remained mounted in the car.
The trucks, pickup shoe and ground spring contacts
should remained mounted in place (73150 - page 3, 6, 7).
The two-conductor wire in the car is separated at the
plug contact.
The two-pole plug is plugged in at one end of the
lighting circuit board (73150 - page 9).
The two pole socket is plugged into the other end of
the lighting circuit board with the intermediate plug
behind the engineer’s cab in the car (73150 - page 9).
The contact strip on the ends of the lighting circuit
board is not mounted in the car (73150 - page 10).

Tuotetiedot

Merkki: Marklin
Kategoria: Mallin rakentaminen
Malli: 43303

Tarvitsetko apua?

Jos tarvitset apua merkille Marklin 43303 esitä kysymys alla ja muut käyttäjät vastaavat sinulle