LevelOne KCM-0832 Käyttöohje

LevelOne Kytkin KCM-0832

Lue alta 📖 käyttöohje suomeksi merkille LevelOne KCM-0832 (4 sivua) kategoriassa Kytkin. Tämä opas oli hyödyllinen 15 henkilölle ja sai 4.4 tähden keskimäärin 8 käyttäjältä

Sivu 1/4
LevelOne
K - 32 / KCM- CM 08 1632
8 / -Port KVM Module 16
Quick Installation Guide
Package Checklist
Quick Installation Guide
Introduction
Each Host port connector is HDDB15 type. The 3- -1 VGA cable s a HDDB15 male connector at one end, plug it into in ha PC
port of KVM switch back panel, and plug the other ends connectors to PC VGA port, and if
PS/2 Computers Connect PS/2 keyboard connector to keyboard port, and PS/2 mouse connector to mouse port --- .
USB Computers --- connect PS/2-USB changer to PS/2 keyboard connector, then plug the changer into available USB
port. This single USB port can communicate both keyboard and mouse signals. It works as a standard HID (Human
Interface Device), no extra driver needed.
Note: the PS/2 mouse connector should be left dis connected.
Hardware Installation
Before installation, please make sure all of peripherals and computers have been turned o.
Install Modular KVM Switch
1. Pus h KVM switch into the rails from rear of cabinet.
2. Slide the unit into the rack and secure it to the rack.
Install the Computer/Server on Host Side
Local Console Connect the keyboard, mouse and monitor to the local console port--- s.
The recommend Power sequence is as follows: monitor, KVM Switch, nally the computers. ed Up

Tuotetiedot

Merkki: LevelOne
Kategoria: Kytkin
Malli: KCM-0832

Tarvitsetko apua?

Jos tarvitset apua merkille LevelOne KCM-0832 esitä kysymys alla ja muut käyttäjät vastaavat sinulle