Kuzco Motif PD75027 Käyttöohje

Sivut 1 Engels Helpotus

Lue käyttöohje merkille Kuzco Motif PD75027 ilmaiseksi verkossa tai lataa PDF. Ohje on ollut hyödyllinen 33 henkilölle. Kysyttävää mallista? Esitä kysymys

INSTALLATION SHEET
PD75027
Ceiling LED Pendant
START FROM HERE
19054 28th Avenue Surrey, BC Canada V3Z 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W: kuzcolighting.com
Please Note:
• This Kuzco LED fixture comes with pre-wired LED module(s)
contact with the module could cause permanent damage
• For dimming, an ELV (Electronic Low Voltage) or TRIAC type of dimmer is required
• 120V input
• Make sure is POWERCOMPLETELY OFF at the fuse box
• Have your fixture installed by a qualified licensed electrician
• Prepare everything in a clear area
• Wear gloves at all times during this installation
• Read instructions carefully before you start assembly
• Keep this installation sheet for future reference
Technical Support: 1-855-855-8926
Remove fixture from its original package
Separate mounting plate from canopy (1c)(2a) by
removing canopy screws (2b)
Attach mounting plate to electrical junction box (1c)
(1a)(1e) using junction box screws provided in
hardware package
To change fixture height, push and hold wire gripper
(2g), slide wire to desired length and then release wire
gripper (2g) to secure
Make proper electrical connections ( to “L”, blackhot
whiteground“GND”) to “N”, neutral to with wire
nuts (1b) provided in hardware package and place
driver (4a) inside junction box (1a)
Attach canopy to mounting plate with (2a)(1c)canopy
screws (2b)
Secure pendant tube to pendant holder by (3b)(3a)
threading clockwise
1.
2.
3.
4.
5.
6.
1a.
1b.
4a.
1c.
1e.
2a.
2b.
3a.
3b.
2g.
7.
20220322

Arvostele tämä ohje

Tuotetiedot

Merkki: Kuzco
Kategoria: Helpotus
Malli: Motif PD75027

Tarvitsetko apua?

Jos tarvitset apua merkille Kuzco Motif PD75027 esitä kysymys alla ja muut käyttäjät vastaavat sinulle