Kramer VS-211X Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Kramer VS-211X (2 sivua) kategoriassa Reititin. Tämä opas oli hyödyllinen 56 henkilölle ja sai 4.0 tähden keskimäärin 6 käyttäjältä

VSVS-211X / -411X Quick Start

P/N:

2900-301247QS

Rev:

3

Scan for full manual

VSVS-211X and -411X Quick Start Guide

This guide helps you install and use your VS-211X/ VS-411Xfor the first time.

Go to www.kramerav.com/downloads/VS-411Xto download the latest user manual and check if firmware

upgrades are available.

Step 1: Check in the bwhat’sox

VSVS-211X / -4K Auto Switcher411X

4 Rubber feet

1 Power adapter and cord

1 Quick start guide

Step 2: Get to know your - -411X VS211X/ VS

The terms HDMI, HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

#

Feature

Function

1

PROG Micro USB Connector

Connect to upgrade the rmware.

2

SETUP 4-way DIP-Switches

Set the operation DIP-switches (see ). Setting the DIP-Switches

3

IN Buttons

Press to select an I input (button lights orange HDM).

4

OUT LED

Lights green when an HDMI output is connected.

5

ON LED

Lights green when the device receives power.

6

HDMI Connectors ™IN

Connect to an HDMI source (2 for , 4 for ). VS-211XVS-411X

7

HDMI™ OUT Connector

Connect to an HDMI acceptor.

8

AUDIO OUT3.5mm Mini Jack

Connector

Connect to an balanced stereo audio acceptor. un

9

REMOTE IN Terminal block Connector

Connect to contact closure switches by momentary contact between the desired

pin and common GND pin to select an input.

10

5V DC Power Connector

Connect to the power supply and to the mains electricity.

Step 3: Install - VS211X/ VS- 411X

Install using one of the following methods: VS-211X/ VS-411X

•Attach the rubber feet and place the unit on a at surface.

•Fasten a bracket (included) on each side of the unit and attach it to a at surface

(see www.kramerav.com/downloads/VS-411X).

•Mount the unit in a rack using the recommended rack adapter

(see www.kramerav.com/product/VS-411X).

•Ensure that the environment (e.g., maximum ambient temperature &

air ow) is compatible for the device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

•Maximum mounting height for the device is 2 meters.

Tuotetiedot