Kicker 47KMFC11W Käyttöohje

Sivut 9 Engels Kaiutin

Lue käyttöohje merkille Kicker 47KMFC11W ilmaiseksi verkossa tai lataa PDF. Ohje on ollut hyödyllinen 35 henkilölle. Kysyttävää mallista? Esitä kysymys

EOP2020-CS2
5/17/2021
REV-A.2
47KMFC Mount Configuration Guide
Page 1 of 9
The 47KMFC fixed mounting system is designed to mount to flat surface applications. The
four by 2.5” (64mm) bolt pattern accepts multiple styles of fasteners providing ease of fitment to
existing vehicles while also speeding assembly. The KMFC mount accepts either 5/16” or 8mm
bolts and nuts. Three bolting configurations are designed into the mount providing the customer
with options to best fit their application:
•Bolt-thru-mounting
•Bolt-to-mounting
•Stud mounting
This document addresses these configurations to provide insight into the capability of the KMFC
mounting system.
MOUNTING YOUR NEW ENCLOSURE
The use of flat washers is suggested between the mounting surface and tightening
fastener. Loctite Threadlocker 271 (red) is not included but required for installation. The
following parts identified are included and required for mounting your new enclosure.
1.Electrical Connector
2.5/16”-18UNC hex nuts
3.1½” long 5/16”-18UNC hex head bolts
4.7/8” long 5/16”-18UNC socket head bolts
5.Vehicle Mount
6.Speaker Enclosure

Arvostele tämä ohje

Tuotetiedot

Merkki: Kicker
Kategoria: Kaiutin
Malli: 47KMFC11W

Tarvitsetko apua?

Jos tarvitset apua merkille Kicker 47KMFC11W esitä kysymys alla ja muut käyttäjät vastaavat sinulle