KHOMO GEAR GER-1273 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille KHOMO GEAR GER-1273 (2 sivua) kategoriassa Projektioruutu. Tämä opas oli hyödyllinen 32 henkilölle ja sai 4.1 tähden keskimäärin 16.5 käyttäjältä

Sivu 1/2
To ensure the performance of your screen, please note the following points:
1. When installing the screen, find a floor or counter top of the correct size. It's best to cover it with a clean
cloth sheet or another soft material so the screen does not get damaged.
2. Do not write or mark the screen or the frame.
3. Do not use sharp or hard objects on the screento avoid scratches or damage.
4.Avoid touching the white part of the screenwith your hands.
5. Do not use a corrosivedetergent to clean the screen. For cleaning use a soft clean cloth to remove dust.
6. During installation, please take it lightly and keep children away.
7. For this assembly it's recommended to have two people involved
Side Frame x2
Top & Bottom Frame x4
Center Support Bar x2
Long & Short Fiberglass Rod x4
Screen x1
Corner Joint
Plate x4
Spring Hook
x1
Springs
x100
Hanging Bracket
x4
Joint Plates Screws
x24
Wall Anchors
x8
Wall Screws
x8
Center Joint
Plate x2
1. Place the frames facing down onto the floor or (as the image ), and screw the center
plates into place by using the plate screws.
2. After assembling the top and bottom frames, securely fasten the side frame with
corner plates using the designated screws to ensure a stable structure.

Tuotetiedot

Merkki: KHOMO GEAR
Kategoria: Projektioruutu
Malli: GER-1273

Tarvitsetko apua?

Jos tarvitset apua merkille KHOMO GEAR GER-1273 esitä kysymys alla ja muut käyttäjät vastaavat sinulle