Jung WS10D Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Jung WS10D (3 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 42 henkilölle ja sai 4.6 tähden keskimäärin 7 käyttäjältä

KNX Sensoren

Art.-no.: WS 10 D, WS 10 T, WS 10 H

Operating Instructions

Brightness Sensor, Temperature Sensor

Twilight sensor

1.Function.............................................................................................1

2.Safety instructions............................................................................1

3.Connection.........................................................................................1

4.Fitting instructions............................................................................2

5.Technical Data...................................................................................2

6.Acceptance of guarantee..................................................................3

1. Function

The climatic data of interest are collected by three different transducers,

ie. the brightness sensor, the twilight sensor (Fig. ) and the temperature

sensor (Fig. ) and converted into analogue voltage signals (0 – 10 V).

The evaluation of these signals requires additional electronics (e.g.

instabus weather station) which offers the capability of transmitting

measured value or instruction telegrams to the EIB instabus depending

on the analogue signals received. To prevent the formation of moisture

inside the housings, the sensors are equipped with pressure-

compensating elements (weatherproofing membrane).

2. Safety instructions

Attention: Electrical equipment must be installed and fitted by

qualified electricians only.

Subject to change without notice.

3. Connection

The connecting cables passes through the screwed conduit entry no. 7 to

the connecting terminals.

Stand: Okt-07 825 060 03

Tuotetiedot