James QX5LR-S Käyttöohje

Sivut 2 Engels Kaiutin

Lue käyttöohje merkille James QX5LR-S ilmaiseksi verkossa tai lataa PDF. Ohje on ollut hyödyllinen 31 henkilölle. Kysyttävää mallista? Esitä kysymys

QX SOUNDBAR WALL REFRAMING FOR RETROFIT INSTALLS

If the installation area is a retroﬁt, then more than likely reframing of the

wall studs may be required to be able to install the QX In-Wall SoundBar

properly.

Once the drywall section has been removed, the the studs are now free to be

braced and cut.

Once the installation location and studs have been identiﬁed, enough

drywall must be cut away to expose the underlying studs with enough

space for reframing to take place.

We recommend bracing each stud on both sides, with your method of

choice, before performing cuts on the vertical wall studs.

Image of cut vertical stud with braces on either side sides.Continue the reframing process until the required length to accommodate

the QX SoundBar has been reached.

NOTE: If you’ve ordered a preconstruction board, then now would be the

time to install it. See the preconstruction installation guide for more

information on PCB/PCBF installation.

Arvostele tämä ohje

Tuotetiedot

Jos tarvitset apua merkille James QX5LR-S esitä kysymys alla ja muut käyttäjät vastaavat sinulle