Ixxat CAN@net II/Generic Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Ixxat CAN@net II/Generic (3 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 36 henkilölle ja sai 4.5 tähden keskimäärin 9 käyttäjältä

V1.0

www.ixxat.com

Page 1 of 3

The CAN@net II/Generic enables easy and flexible access to CAN

systems via Ethernet. The device provides two operation modes,

a bridge mode and a gateway mode.

In gateway mode, the CAN@net II/Generic is connected to a PC

or controller platform via TCP/IP. It uses a simple ASCII protocol

for communication and allows uncomplicated system access via

LAN or the Internet.

By using two CAN@net II/Generic, a CAN-Ethernet-CAN-Bridge

can be realized. This allows the exchange of CAN messages

between two CAN systems via TCP/IP and provides additional

filter options.

This product is not recommended for new developments. For

new developments we recommend the use of the successor

product Ixxat CAN@net NT 100/200/420 or the CANnector.

This product is not recommended for new developments. For

new developments we recommend to use the successor product

Ixxat CAN@net NT 100/200/420 or the CANnector.

FEATURES AND BENEFITS

ORDER NUMBER1.01.0086.10201

CAN channels (high-speed)1

CAN bus interfaceISO 11898-2, D-Sub 9 connector according to CiA 303-1

CAN bit rates10 to 1000 kBit/s

CAN bus termination resistorsNone

CAN controllerSJA1000T; CAN 2.0 A/B

CAN high-speed transceiverSN65HVD251P

Galvanic isolation1 kV DC for 1 sec, 500 V AC for 1 min

Power supply9-32 V DC, 3 W

Messages per second (send/receive)max. 21000 msg/s (with VCI, receive direction)

Bridging of large distances and easy system access using Ethernet

■

Filter and conversion functionality

■

Cost savings due to simple wiring

■

1 x CAN channel

■

Line protection by galvanic isolation

■

DATASHEET

CAN@net II/Generic

Tuotetiedot