Infosec R2 PRO Käyttöohje
Infosec
jännitteensäädin
R2 PRO
Lue alta 📖 käyttöohje suomeksi merkille Infosec R2 PRO (11 sivua) kategoriassa jännitteensäädin. Tämä opas oli hyödyllinen 9 henkilölle ja sai 4.8 tähden keskimäärin 5 käyttäjältä
Sivu 1/11
INFOSEC UPS SYSTEM – 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 11 16 AA XX 203 01
2
User guide
To ensure this product is correctly installed and used appropriately, we highly advise you to
read this user guide very carefully.
1 . I N T R O D U C T I O N
Designed to be extremely efficient and user-friendly, R2 Pro is the perfect AVR to protect
your sensitive electronic equipments.
2 . M A I N C H A R A C T E R I S T I C S
Automatic Voltage Regulator
Automatically regulate the input voltage to a more stable level for your appliances to avoid
damages to the appliances.
Microprocessor Control
By means of innovative software control programs, the complicated hardware circuitry is
inlaid in the powerful microprocessor. Apart from reduced size, it also lowers the defective
rate of AVR and the accuracy in the regulations.
Voltage Display
Through a digital LED voltage meter shows the input/output voltage of the device.
Delay Time
Upon the switching on or resuming from the protections, the AVR will wait 6 or180 seconds
before it give output voltage
Operation Principle
The CPU based intelligent circuit samples the input voltage and controls the action of the
relays and opening of the coil winding of the transformer in a proper combination to adjust
the output voltage.
Loading Capability Diagram
Input voltage & Output Voltage diagram
Output Voltage
INFOSEC UPS SYSTEM – 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 11 16 AA XX 203 01
3
3 . S A F E T Y I N S T R U C T I O N S – S e c u r i t y
Risk of Electric Shock:
The AVR unit uses potentially hazardous voltages. Do not attempt to disassemble
this equipment as it does not contain accessible components that can be repaired by
users.
All repairs should be performed by qualified technicians only.
The utility power outlet shall be near the equipment and easily accessible. To isolate
the AVR from AC input, remove the plug from the utility power outlet.
Install the AVR in a temperature and humidity-controlled indoor area free of
conductive interference.
It should not be exposed to direct sunlight or sources of heat. Do not cover the
ventilation slots.
Disconnect the AVR from AC power before cleaning with a damp cloth (no cleaning
products).
In an emergency situation, switch the AVR to the “Off” position and disconnect the
unit from the AC power supply.
When the AVR is out of order, please refer to “section 8: trouble shooting” and call
the hot line.
Connected products:
Make sure that the connected load does not exceed AVR capabilities.
Do not leave any recipients containing liquid on or near the AVR.
Do not plug the AVR into a power strip or surge suppressor.
The AVR has been designed for sensitive equipments. It should not be used with
equipment with inductive loads such as motors.
Do not connect any household appliances such as vacuum cleaners or life-support
systems to the AVR.
Due to excessive consumption, laser printers should not be connected to the AVR.
4 . S T O R A G E I N S T R U C T I O N S
Please keep or use the AVR in an environment which is
Well ventilated
Not exposed to direct sunlight or near any heating apparatus
Away from combustible gas, corrosive substance or heavy dust
Away from water, moisture, oil or grease
Secure of no risk of falling
Out of reach of children
In the event of fire in the vicinity, please use dry-powder extinguishers. The use of liquid
extinguishers may present a danger of electric shock.
Tuotetiedot
| Merkki: | Infosec |
| Kategoria: | jännitteensäädin |
| Malli: | R2 PRO |
Tarvitsetko apua?
Jos tarvitset apua merkille Infosec R2 PRO esitä kysymys alla ja muut käyttäjät vastaavat sinulle
jännitteensäädin Infosec Käyttöohjeet
2 Huhtikuuta 2025
2 Huhtikuuta 2025
Infosec Käyttöohjeet
2 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025