Impact QB-BKT Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Impact QB-BKT (4 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 11 henkilölle ja sai 3.7 tähden keskimäärin 6 käyttäjältä

Sivu 1/4
Speed Ring Flash Bracket
for QuikBox
INSTRUCTIONS
Introduction
Thank you for choosing the Impact Speed Ring Flash Bracket for Quikbox.
This is a replacement bracket for the Impact Quikbox. This bracket can
be used to mount an Impact Quikbox softbox to a flash in a variety of
configurations. The bracket is adjustable vertically and features a universal
shoe that is adjustable horizontally.
Nikon SB-900 and SB-910. It can also be used to install a remote control
receiver with the flash and the Quikbox.
For receivers that do not include a bottom shoe connector, the bracket
shoe is removable to expose a male 1/4”-20 screw. There are also three
plastic washers included in the shoe assembly to accommodate receivers
of various sizes.
Thumbscrew C
Thumbscrew B
Cold Shoe
Thumbscrew A
Miniature
Thumbscrew
Contents:
·Impact QB-BKT Speed Ring Flash
Bracket with removable shoe
·Three plastic washers
·Adapter ring
·User manual
·One-Year Limited Warranty
Instructions
To assemble the Speed Ring Flash Bracket, loosen Thumbscrew C. With
the light stand mount (Thumbscrew A) below Thumbscrew C, align the
flanges of the bracket with the guide controlled by Thumbscrew C and slide
the bracket into the mounting apparatus. Adjust the height to the desired
position and tighten Thumbscrew C.
Directions for mounting the Impact Quikbox to the Speed Ring Flash
Bracket are included with the Quikbox.
Compatibility:
·Compatible with the Impact Quikbox 15 × 15” and 24 × 24” softboxes.
Specifications:
·Dimensions – (L × W × H): 4.0 × 5.75 × 10.5” (10 × 14.5 × 27 cm)
·Weight – 8 oz. (227 g)

Tuotetiedot

Merkki: Impact
Kategoria: Ei luokiteltu
Malli: QB-BKT

Tarvitsetko apua?

Jos tarvitset apua merkille Impact QB-BKT esitä kysymys alla ja muut käyttäjät vastaavat sinulle