IFi Audio micro iPhono3 Black Label Käyttöohje
Sivut 1 Engels Ei luokiteltu
Lue käyttöohje merkille IFi Audio micro iPhono3 Black Label ilmaiseksi verkossa tai lataa PDF. Ohje on ollut hyödyllinen 53 henkilölle. Kysyttävää mallista? Esitä kysymys
1. DC 15V Power input
The iPhono3 Black Label must ONLY be powered by 15 volts.
Tip: For best performance, use the included ultra-low noise iPowerX 15V power
supply.
2. EQ Curves Selection
This is the EQ curves selection switch.
Tip: For best performance switch to the setting most suited to your LP's EQ curve.
3. RCA analogue output
This is an analogue output.
micro
ifi-audio.com
Tip: EQ Curves
Columbia*: most Columbia/CBS, Epic, EMI (records originally issued under
Columbia) etc.
RIAA: standard EQ curve for all records issued after 1980s and some after 1950s.
There are four different types of RIAA EQ available, e.g. eRIAA, IEC, RIAA, eRIAA+IEC.
Adjust it via the micro switches located on the underside of iPhono3 Black Label.
Decca*: most Decca, London, Deutsche Grammophon (DG), Archiv, EMI, Argo, NAB etc.
* For pre-1980 records
If an LP sounds overly bright, edgy, thin and lacking scale and
body via RIAA EQ, please try Decca EQ.
If an LP sounds both too bright and with muddy overblown
bass, please try the Columbia EQ.
Tip: For further guidelines please see the enclosed instructions or go to our website
https://ifi-audio.com/iphono-calculator/
7. MM input
Suitable for MM and high-output MC cartridges with an output
voltage >1mV.
Ver1.1
INPUTS
MM
MC
R
L
R
L
7
4
5
2
31
COLUMBIA
RIAA
DECCA
OUTPUTS
R
L
15VDC
8
8. LEDs
Ready
®
Tube State
Class A
Class A TubeState® in operation
Power on
4. MC input
This is a MC input suitable for MC cartridges to an output
voltage ≤1mV.
5. Ground
This is iPhono3 Black Label's ground, please connect it to the
turntable's grounding wire.
6. Settings Switches
The settings switches are located on the underside of iPhono3
Black Label.
Tip: For best sound performance adjust the gain, load and EQ curve settings in
accordance with your preference, turntable's specifications and LP's EQ curve.
6
iPhono3
B
B
B
BBLA
LA
LA
LALAC
C
C
CCK
K
K
KKL
L
L
LLA
A
A
AAB
B
B
BBE
E
E
EEL
L
L
LL
Technologies
• 6 x EQ curves: RIAA/eRIAA/IEC/eRIAA+IEC/Decca/Columbia
• Ultra-wide gain options: 36-72dB
• Direct-coupled, servoless Class A TubeState amplifier
• Nichicon audio-grade power supply capacitors
• ELNA Silmic ll capacitors, Panasonic OSCON aluminum polymer capacitors
• High performance JFET opamps
• Hand-matched ultra-low noise bi-polar transistors
Specifications
Input voltage: 15V/1.2A, AC 100 -240V, 50/60Hz (with iPower X)
Frequency response: 10Hz – 100KHz (±0.3dB)
20Hz – 20kHz (±0.2dB)
Dynamic range: MM(36dB): >108dB (A-weighted)
MC(60dB): >106dB (A-weighted)
SNR: MM(36dB): >85dB (A-weighted re. 5mV)
MC(60dB): >85dB (A-weighted re. 0.5mV)
Overload margin: MM(36dB): >26dB (re. 5mV, @ 1% THD)
MC(60dB): >22dB (re 0.5mV, @ 1% THD)
Crosstalk:-<71dB(1kHz)
Max undistorted output:7V (Load ≥ 600Ω, THD ≤1%)
THD: <0.005% (MM 36dB 1V out 600Ω Load)
Output impedance: <100Ω
Power consumption:<5W
Dimensions: 178 x 64 x 26 mm
7.0” x 2.5” x 1”
Weight: 265 g (0.58 lbs)
Warranty period: 12 months
Specifications are subject to change without notice.
Tuotetiedot
| Merkki: | IFi Audio |
| Kategoria: | Ei luokiteltu |
| Malli: | micro iPhono3 Black Label |
Tarvitsetko apua?
Jos tarvitset apua merkille IFi Audio micro iPhono3 Black Label esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Ei luokiteltu IFi Audio Käyttöohjeet
IFi Audio iSilencer3.0 Käyttöohje IFi Audio iDefender3.0 Käyttöohje IFi Audio hip-dac 2 gold edition Käyttöohje IFi Audio GO bar Roon Bundle Käyttöohje IFi Audio hip-dac Käyttöohje IFi Audio micro iDSD Black Label Käyttöohje IFi Audio nano iOne Käyttöohje IFi Audio iSilencer+ Käyttöohje