Hoffman P1032CN Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Hoffman P1032CN (1 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 36 henkilölle ja sai 4.9 tähden keskimäärin 3 käyttäjältä

Spec-00212 I

FREESTAND CABINETS PROLINE™ AccEssORIEs

EQUIPMENT PROTECTION SOLUTIONSSUBJECT TO CHANGE WITHOUT NOTICENETWORKING1

Spec-00212

I

763.422.2661

763.422.2588

NETWORKING

Free-Stand CabinetS

PrOLine™ aCCeSSOrieS

FRAME JOINING KITS

Permits joining two enclosure frames while maintaining an

environmental seal.

Side-to-Side Joining Kit consists of six frame nuts and screws, as

well as gasket material to maintain a dust-tight and water-tight seal

between ganged frames. Can be used if rack angles are not in the

front or rearmost positions or if a subpanel is not in the rearmost

position.

Alternate Joining Kit consists of three standoffs, six frame nuts

and screws, as well as gasket material. This kit facilitates frame

joining when rack angles are in the front or rearmost position, or if

a subpanel is in the rearmost position.

Front-to-Back Joining Kit permits front-to-back joining of two

single-bay enclosures. This kit does not fit 1200-mm or 1600-mm

wide frames.

BulletIn: p20, p20eM

Catalog NumberDescription

PJ2FStandard Frame Joining, Side-to-Side

PJ2FDStandard Frame Joining, Side-to-Side, Non-gasketed

PJ2FHF2EMC Standard Frame Joining, Side-to-Side

PJ2FFAlternate Frame Joining, Side-to-Side

PJ2FBFFrame Joining, Front-to-Back

Tuotetiedot