Grasslin Topica 200 S Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Grasslin Topica 200 S (36 sivua) kategoriassa instalatie de incalzire. Tämä opas oli hyödyllinen 44 henkilölle ja sai 4.7 tähden keskimäärin 4 käyttäjältä

PLUG-IN-TIMER

Setting ON/OFF times

Move all tappets between “ON“ and “OFF“ times required to

outer position on outer dial. See figure 1.

Setting current time

450 S (fitted with clock hands) – rotate outer dial slowly until

arrowhead aligns with current weekday. Set precise time by

rotating minute hand.

400 S (fitted with clock hands) – rotate minute hand until

arrowhead aligns with correct time on outer dial.

200 S (without clock hands) – rotate outer dial slowly to align

arrowhead with correct time on outer dial.

Do not attempt to rotate the clock hands or the dial in an anti-

clockwise direction as this could damage the mechanism.

Manual override switch

–In position 1 the timeswitch is permanently ON irrespective of

tappet positions.

–In position the timeswitch is operating on timed control and

will only switch ON and OFF as determined by tappet

positions.

–In position 0 the timeswitch is permanently OFF irrespective of

tappet position.

–See figure 3

,  Connecting your appliance

Plug the timer into the socket. Switch the socket on. Plug the

appliance into the timer’s socket and switch the appliance on.

The appliance will now be controlled automatically by the tappet

settings on your timeswitch, or you can use the manual switch as

described. Remember that the manual switch must

be in position for automatic control.

200S/400S/ – 24 hour dial, minimum switching time 15 minutes.

1

2

3

34

Tuotetiedot