Genexis Fiberbox XGS2110 Käyttöohje

Genexis Ei luokiteltu Fiberbox XGS2110

Lue alta 📖 käyttöohje suomeksi merkille Genexis Fiberbox XGS2110 (5 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 22 henkilölle ja sai 3.8 tähden keskimäärin 11.5 käyttäjältä

Sivu 1/5
PLEASE READ THIS PRODUCT GUIDE AND SAFETY INSTRUCTIONS BEFORE
INSTALLING OR USE OF THE PRODUCT. AS RECIPIENT OF THE PRODUCT,
YOU ARE RESPONSIBLE TO GET FAMILIAR WITH THE PRODUCT GUIDE AND
SAFETY INSTRUTIONS BEFORE USING THE PRODUCT. CONTACT YOUR SERVICE
PROVIDER IN CASE OF ANY QUESTIONS.
Connecting the FiberBox
1. Open the green shuer from
the WAN port, insert the ber
outlet into the WAN port.
2. Connect your gateway to the
LAN (10GE) port via an RJ45
network cable. A CAT6 cable
or beer is recommended.
3. Connect the supplied power
adapter to the FiberBox and
plug the adapter into a
power socket.
4. Press the ON/OFF buon to
power on the device.
Warning: This product
contains a laser that emits
invisible light. It is a Class 1
Consumer Laser product
according to EN 50689:2021.
However, it is still advised to
not look directly into the ber
connector when the product is
powered on.
Warning: Do not cover the
device, this will interfere with
the ventilation.
Ambient Operating
Temperature: 32°F ~ 104°F

Tuotetiedot

Merkki: Genexis
Kategoria: Ei luokiteltu
Malli: Fiberbox XGS2110

Tarvitsetko apua?

Jos tarvitset apua merkille Genexis Fiberbox XGS2110 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Genexis Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet