Festo EHAM-MA-E19-25-V3 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Festo EHAM-MA-E19-25-V3 (12 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 23 henkilölle ja sai 4.2 tähden keskimäärin 4 käyttäjältä

EHAM-MA-E19-25-V3

Adapter plate kit

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Deutschland

+49 711 347-0

www.festo.com

Assembly instructions

8159352

2021-08

[8159354]

Translation of the original instructions

© 2021 all rights reserved to Festo SE & Co. KG

1

Applicable documents

All available documents for the product

è

www.festo.com/sp.

DocumentProduct

User documentsActuators

User documentsModules

Tab. 1:

Applicable documents

2Safety

2.1

Safety instructions

–Before working on the product, switch off the power supply and secure it

against being switched on again.

–

Observe further applicable documents.

–Observe tightening torques.

2.2Intended use

2.2.1Use

Connection of modules and actuators.

2.2.2Permissible components

ModuleAdapter plate kitActuator

VAEM

VTOF (with mounted module

VAEM)

EHAM-MA-E19-25-V3EGSC-...-25

EGSC-...-32

EGSK-20

EGSK-26

Tab. 2:

Permissible components

3Additional information

–Contact the regional Festo contact if you have technical problems

è

www.festo.com.

–Accessories and spare parts

è

www.festo.com/catalogue.

4Product Range Overview

4.1Scope of delivery

1

234

5

Fig.1

1

Adapter plate (1x)

2

Centring pin (6x)

3

Screw (4x)

4

Centring ring (4x)

5

Screw (4x)

The kit contains all the mounting attachments that may be required. Some

mounting attachments will be left over.

4.2Not in scope of delivery

6

7

Fig.2

6

Actuator (1x)

Mini slide EGSC

Electrical slide EGSK

7

Modul (1x)

Dispense head VTOF (with mounted

module VAEM)

Valve control module VAEM

5

Assembly

5.1Preparation

•Observe the labelling on the adapter plate.

P

QQ

Fig. 3:Front side of the adapter plate

P

Drilled holes for screws

A EGSK-26

B EGSK-20

C EGSC-...-25

D EGSC-...-32

Q

Drilled holes for module

S

Fig. 4:Rear side of the adapter plate

S

Drilled holes for centring pins

A EGSK-26

B EGSK-20

C EGSC-...-25

D EGSC-...-32

5.2Connection VTOF/VAEM with EGSC/EGSK

2

3

6

1

P

S

Fig. 5:

Mounting adapter plate on actuator

EGSC-...-25EGSC-...-32EGSK-20EGSK-26

2Centring pinZBS-2ZBS-4ZBS-2ZBS-5

3ScrewM3x8M4x8M3x8M4x8

[Nm]1.2 ± 20% 2.9 ± 10% 1.2 ± 20% 2.9 ± 10%

[P]Drilled holeC-CD-DB-BA-A

[S]Drilled holeC-CD-DB-BA-A

Tab. 3:

Screw sizes and tightening torques

1.Position two centring pins in the corresponding drilled holes [S].2

2.

Place the adapter plate over the centring pins on the actuator .126

3.Fasten the adapter plate with the screws over the corresponding drilled13

holes [P] on the actuator .6

Tuotetiedot