Festo DAYP-E21-60 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Festo DAYP-E21-60 (1 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 37 henkilölle ja sai 4.4 tähden keskimäärin 5 käyttäjältä

Translation of the original instructions

1Further applicable documents

All available documents for the product www.festo.com/pk.è

Observe further applicable documents:

–Operating instructions for cantilever axis

–Operating instructions for shock absorber

2Safety

2.1Safety instructions

–Only assemble the product on components that are in a condition to be safely

operated.

2.2Intended use

For mounting a shock absorber on the cantilever axisELCC.

3Further information

–Accessories www.festo.com/catalogue.è

4Product range overview

4.1Included in delivery

1

Retaining bracket (1x)

2

Stop (1x)

3

Screw (2x)

4

Slot nut (2x/4x)

5

Screw (4x/8x)

Fig. 1

4.2Not included in the delivery

6

Cantilever axis (1x)

ELCC

Fig. 2

7

Shock absorber (1x)

YSR-...-C

Fig. 3

5Assembling the shock absorber retainer

Fig. 4 Mounting the stop

DAYP-E21607090110

M6x12M6x16M8x253Screw

[Nm]6±20%6±20%24±20%

Tab. 1 Screw sizes and tightening torques

Fig. 5 Positioning the slot nuts

Fig. 6 Fixing the retaining bracket

1.Secure the retaining bracket to the slot nuts using the screws.145

2.Slide the retaining bracket into the approximate end position. Observe1

distance of at least 1mm from the cover(B).

Fig. 7 Mounting the shock absorber

1.Secure the shock absorber to the retaining bracket via the through71

hole(A) 1 Further applicable documents.è

2.Tighten the screws.5

DAYP-E21607090110

M5x10M8x16M8x205Screw

[Nm]4.5±20%20±20%

Tab. 2 Screw sizes and tightening torques

3.Adjust the shock absorber 1 Further applicable documents.7è

8087598

DAYP-E21

Shock absorber retainer

8087598

2018-07

[8087600]

Instructions| Assembly

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

Tuotetiedot