Entes EMG-02 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Entes EMG-02 (21 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 21 henkilölle ja sai 4.9 tähden keskimäärin 11 käyttäjältä

Sivu 1/21
EMG Ethernet Modbus Gateway
User Manual
Rev 2.2
07/2010
CONTENTS
1. Introduction
1.1. General Features
1.2 Installing the Drivers
2. Configuration
2.1 Main Device Parameters
2.1.1 RS485 Serial Communication Parameters
2.1.1.1 Baud Rate
2.1.1.2 Data Bit
2.1.1.3 Stop Bit
2.1.1.4 Parity Bit
2.1.1.5 Time-Out
2.1.1.6 Delay
2.1.2 Network Parameters
2.1.2.1 Connection Settings
2.1.2.2 DHCP
2.1.2.3 WEB Access
2.1.2.4 WEB Port
2.1.2.5 Log-in Timeout
2.1.2.6 Server IP
2.1.2.7 IP Address
2.1.2.8 Subnet Mask
2.1.2.9 Default Gateway
2.1.2.10 MODBUS/TCP Port
2.1.2.11 Link
2.1.3 Operating Modes (MODBUS/TCP /Tunnel Mode)
2.1.3.1 MODBUS/TCP Packet Structure
2.1.3.2 Tunnel Mode Packet Structure
2.1.4 Configuration example for communicating over ADSL modem
2.1 Reading/Changing the Configuration using the USB interface
2.2 Security settings
2.3 Reading/Changing the Configuration using the WEB interface
3. Firmware Updates
4. Appendices
Appendix A Differences between EMG model devices
Appendix B Query Interval and TCP Time-Out

Tuotetiedot

Merkki: Entes
Kategoria: Ei luokiteltu
Malli: EMG-02

Tarvitsetko apua?

Jos tarvitset apua merkille Entes EMG-02 esitä kysymys alla ja muut käyttäjät vastaavat sinulle