Dynaudio Studio S4-LCR65W Käyttöohje
Lue alta 📖 käyttöohje suomeksi merkille Dynaudio Studio S4-LCR65W (9 sivua) kategoriassa Kaiutin. Tämä opas oli hyödyllinen 27 henkilölle ja sai 4.8 tähden keskimäärin 14 käyttäjältä
Sivu 1/9

S4-LCRMT S4-LCR65W
Installation Manual
Studio Series

Welcome to the custom install Studio Series and thank you for choosing a
Dynaudio Custom Install product.
The S4-LCRMT and S4-LCR65W are modular in-wall speakers designed for left,
centre and right channel applications in multi-channel audio systems.
The S4-LCR Series offers very high quality audio performance while at the same
time providing multiple conguration options and incorporating numerous features
designed to ease installation.
Dynaudio custom install limited warranty
Dynaudio warrants its custom install products to be free from defects in
materials and workmanship under conditions of normal use and service
for a lifetime period from the date of original purchase. For this warranty
to apply, the unit must be installed and used according to its written
instructions.
The obligation under this warranty shall be limited to the replacement, repair or
refund of any such defective device within the warranty period, provided that:
1. inspection by Dynaudio indicates the validity of the claim;
2. the defect is not the result of damage, misuse, lightning, power
surges, negligence, improper operation (installation) or failure to follow
instructions contained in the manual or written instructions provided by
Dynaudio after the original purchase;
3. the product has not been altered in any way or repaired by others and
that factory sealed units are unopened (a service charge plus parts and
labour will be applied to units defaced or physically damaged);
4. the dealer from whom the Dynaudio products were purchased was
authorized to sell such products at the time of the original purchase;
5. the service provider for, including but not limited, installation or repair of
the product, was authorized in writing by Dynaudio;
6. the original, dated Bill of Sale is presented whenever service is required
during the warranty period;
7. freight charges for the return of products to Dynaudio are prepaid;
8. all units ‘out of warranty’ are subject to a service charge. The service
charge will cover minor repairs (major repairs will be subject to
additional charges for parts and labour).
This warranty is in lieu of and excludes all other warranties, expressed or
implied. Neither this warranty nor any other warranty, express or implied,
including implied warranties of merchantability and tness, shall extend
beyond the warranty period.
Dynaudio shall not be liable for damages to any other equipment or
other items at the site of use, or any other damages whether incidental,
consequential or otherwise. Dynaudio shall not be liable for any anticipated
prots, any incidental or consequential damages, loss of time or other
losses incurred by the purchaser in connection with the purchase, operation
or use of the product.
The information this document contains is subject to change without
notice. In the event that there are differences between this warranty and
the provisions of any advertisements, documentation, product brochures or
packaging cartons, the terms of this warranty shall prevail.
Environmental note
This product complies with international directives, including but not
limited to the Restriction of Hazardous Substances (RoHS) in electrical
and electronic equipment, the Registration, Evaluation, Authorisation and
restriction of Chemicals (REACH) and the disposal of Waste Electrical and
Electronic Equipment (WEEE). Consult your local waste disposal authority
for guidance on how properly to recycle or dispose of this product.
Disposal
Disposal of used electrical and electronic equipment (applicable in
European countries with separate collection systems for this equipment).
This symbol on the product or its packaging indicates that the product
may not be treated as household waste. Instead it must be handed
over to the applicable collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for
the environment and human health. The recycling of materials helps to
conserve natural resources. For more detailed information on recycling
this product, please contact your local authority, community waste
disposal of, or the shop where you purchased the product.
Important safety instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus that produce heat.
9. Only use attachments / accessories specied by the manufacturer.
10. Refer all servicing to qualied service personnel.

1. Introduction
This manual describes the installation of S4-LCR Series modules
within drywall/plasterboard walls. It begins by listing the carton
contents and continues information specic to installing in-wall
speakers.
If this is your rst time working with Dynaudio Studio Series
custom install speakers, or if you have not done so for a while, we
recommend that you read the appropriate sections of this manual
before you begin.
Note: Visit dynaudio.com for the latest Studio Series news and
information.
The S4-LCR Series is designed to provide very high quality left,
centre, and right channel audio in custom installations where
speakers are required to be tted ush in walls. The S4-LCR Series
not only benets from four decades of Dynaudio speaker expertise
but has been designed through its modular format to offer enhanced
versatility in terms of both practical installation and acoustic
performance.
S4-LCR Series modules comprise a Speaker Unit and Installation
Frame. The Installation Frame is inserted into the wall cut-out and
securely xed in place using auto-locking clamps. The Speaker Unit
is then connected to the speaker cables before being inserted into
the Installation Frame to be held in place by a latch system. The grille
is then tted, secured by magnets integrated within the Installation
Frame.
• S4-LCR Series modules are uniquely simple to install. Once a
wall cut-out is created, no tools are required and installation can
be completed by one person without assistance. Every element
of the S4-LCR Series installation procedure, from unpacking the
speakers to painting and tting the magnetic grilles is simplied
and streamlined by design.
• S4-LCR Series speakers employ numerous Dynaudio
technologies, borrowed from the company’s studio monitors and
high-end hi- speakers, to bring genuinely high performance
audio to custom installations: unique bass/mid drivers with large
diameter aluminium voice coils and nite element optimised, low-
distortion magnet systems, proprietary MSP (Magnesium Silicate
Polymer) diaphragms, and precision coated soft dome tweeters
with powerful neodymium magnets are just a few examples
among many.
• The S4-LCR Series comprises two modules:
the S4-LCRMT mid/tweeter module and the S4-LCR65W twin
driver bass module. A single S4-LCRMT module can be used
with one or, for higher volume level applications, two S4-LCR65W
modules.
• S4-LCRMT sensitivity can be adjusted via a rear mounted switch
to match either one or two S4-LCR65W modules. The electrical
crossover between S4-LCRMT and S4-LCR65W modules can
be accomplished passively, using either the standard internal
passive lters, or actively using external active lter components.
Switches and bypass jumpers located on the rear of the speaker
units engage or bypass the internal passive bass module low
pass and mid/tweeter high pass lters.
1.1 Carton Contents
The carton contents for all S4-LCR Series modules are essentially the
same. Items only differ in terms of format and dimension. Within each
carton can be found:
1 x Speaker Module
1 x Installation Frame
2 x Frame Flange
1 x Cut-out Template
1 x Paint Mask
1 x Document pack
A typical carton contents is illustrated in Diagram 1.
Diagram 1
Speaker Unit Frame Flange (pair)
Cut-out Template
Installation Frame
Paint Mask
Document Pack
190mm (7.5”)
x 195mm (7.7”)
S4-LCRMT
• Each S4-LCR Series module is supplied with a pair of Installation
Frame Flanges. With frame anges tted, modules can be
installed individually and spaced apart. With one or both frame
anges removed, multiple modules can be consolidated and
installed in a common wall cut-out.
• S4-LCRMT modules are intended to be installed only in portrait
orientation, however S4-LCRMT speaker units can be rotated
within their installation frames in order that the frames match the
orientation of adjacent S4-LCR65W modules.
• S4-LCR65W modules can be installed in either landscape or
portrait format. In either case, multiple modules can be either
consolidated for installation in a common wall cut-out, or installed
in individual wall cut-outs.
Grilles are not supplied with S4-LCR Series modules but can be
supplied as accessories in a range of lengths to suit installation
congurations. S4-LCR grilles attach magnetically and fully paintable.
Tuotetiedot
Merkki: | Dynaudio |
Kategoria: | Kaiutin |
Malli: | Studio S4-LCR65W |
Tarvitsetko apua?
Jos tarvitset apua merkille Dynaudio Studio S4-LCR65W esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Kaiutin Dynaudio Käyttöohjeet
25 Tammikuuta 2025
25 Tammikuuta 2025
25 Tammikuuta 2025
25 Tammikuuta 2025
25 Tammikuuta 2025
25 Tammikuuta 2025
25 Tammikuuta 2025
24 Tammikuuta 2025
24 Tammikuuta 2025
24 Tammikuuta 2025
Kaiutin Käyttöohjeet
- Kaiutin SureFire
- Kaiutin Toa
- Kaiutin Black Hydra
- Kaiutin LD Systems
- Kaiutin Sencor
- Kaiutin PowerBass
- Kaiutin Nikkei
- Kaiutin LG
- Kaiutin Proel
- Kaiutin Bose
- Kaiutin AOC
- Kaiutin Taga Harmony
- Kaiutin CSL
- Kaiutin Match
- Kaiutin Meridian
Viimeisimmät Kaiutin Käyttöohjeet
8 Huhtikuuta 2025
8 Huhtikuuta 2025
8 Huhtikuuta 2025
7 Huhtikuuta 2025
7 Huhtikuuta 2025
7 Huhtikuuta 2025
5 Huhtikuuta 2025
3 Huhtikuuta 2025
3 Huhtikuuta 2025
3 Huhtikuuta 2025