D-Link DMC-1002 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille D-Link DMC-1002 (21 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 16 henkilölle ja sai 4.5 tähden keskimäärin 8.5 käyttäjältä

Sivu 1/21
Rev. 01 (JUN. 2002)
1907MCB10016000
RECYCLABLE
DMC-1002
SNMP Module for
Chassis-Based Media Converter
Manual
1
TABLE OF CONTENTS
ABOUT THIS GUIDE .................................................................. 2
FEATURES......................................................................................................2
UNPACKING...................................................................................................2
CONFIGURING THE SYSTEM .......................................... 3
THE MEDIA CONVERTER CHASSIS SYSTEM ...................................................3
INSTALLING THE MANAGEMENT MODULE ....................................................3
CONFIGURE THROUGH WEB BROWSER ..........................................................4
CONFIGURATION VIA SERIAL PORT ...............................................................4
SUPPORT SNMP MANAGEMENT....................................................................5
LED INDICATORS ..........................................................................................5
MANAGEMENT SETTING THROUGH WEB
BROWSER
............................................................................................ 6
MANAGEMENT SETTING THROUGH
TERMINAL EMULATOR
...................................................... 13
WHEN FORGOT THE PASSWORD ...................................................................19
TECHNICAL SPECIFICATIONS.................................... 20
2
ABOUT THIS GUIDE
This manual shows you how to configuring your DMC-1002 SNMP Module
for Chassis-Based Media Converter.
Features
9 Compliant with IEEE802.3u 100BASE-TX standards
9 Enable to monitor the module through terminal emulation program and
Web browser
9 The network administrator can access management software by
connecting the management module either to a terminal emulation
program (through the RS232 interface) or to a remote network
management station (through the RJ45 interface and a hub)
9 Status indication include:
1. Identification of: Media Converter type; Slot number occupied
2. Status Indication of Chassis: Redundant Power status; Power Fail status;
Fan Fail status
3. Status Indication of Modules: Unit Power; Link/Activity; Transmit; Receive
9
LED Indication: Power/Power Fail/Fan Fail/MGM/Console/Link/ACT
9 Support Hot-swappable
9 Auto-negotiation for half-duplex/full-duplex on TX ports
9 Equipped with a 19” system chassis 16-converter with Redundant Power
supply for optional Expansion use.
Unpacking
Open the shipping carton of the SNMP Module and carefully unpack its
contents. The carton should contain the following items:
One DMC-1002 SNMP Module for Chassis-Based Media Converter
One RS232 cable
This Manual
If any item is found missing or damaged, please contact your local reseller for replacement.

Tuotetiedot

Merkki: D-Link
Kategoria: Ei luokiteltu
Malli: DMC-1002

Tarvitsetko apua?

Jos tarvitset apua merkille D-Link DMC-1002 esitä kysymys alla ja muut käyttäjät vastaavat sinulle