D-Link ANT24-0700 Käyttöohje

D-Link Ei luokiteltu ANT24-0700

Lue alta 📖 käyttöohje suomeksi merkille D-Link ANT24-0700 (34 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 15 henkilölle ja sai 4.3 tähden keskimäärin 8 käyttäjältä

Sivu 1/34
D-Link Antenna-kit Installation Guide
Installation
(If needed)
Install the surge protector. (You can install with
optional ANT24 series low loss cables)
Note:
With adaptor on an outdoor serial is
Surge protector
attached to the lightning protestion system (ground)
of the buildi ng . All devic es downstream are then
protected by the ground from lightning strikes.It can
protect your sensitive WLAN equipments from high
voltage surges caused by dischargeand transients
at the antennas. It will be integrated in the cabling
system between the antenna and the coax-cable and
must have direct ground contact.
Installation
D-Link Antenna-kit Installation Guide
Surge protector
Installation guide
for outdoor antenna-kit
Step 1
loosen the screw from the surge protector.
Step 2
get a normal conductive copper wire with 2 sides stripped long enough to be conductive,
these wires can lead high voltage surges into the grounding.
Remark:
(1) for the ground screw you use, we suggest the longer (deeper into ground) the better performance it has.
(2) please use a copper wire with diameter at least from 2.0mm, the thicker the diameter, the higher
voltage it can sustain.
Option (1) Option (2)
Ground
Step 3
find a conductive material nearby the antenna installation sites, connect another end of the wire
into position, there are several options:
(1) Use a long screw to stick into the ground tightly, connect another wire onto.
(2) fix or solder another end of wire onto a steel material/ bar under steel construction,
such as wall for buildings, railings or other conductive materials which set up from
the ground.
ANT24-Series
Regulations
2.4GHz~2.5GHz 5.15GHz~5.35GH
z
5.47~5.725 5.75GHz~5.875GHz
point to multi-point
point to point
point to multi-point 36dBm 36dBm
point to point
30+6(antenna gain ) dBm
then above 30dBm, one dB output
power reduced, then 3dB antenna gain
increased
30+23(antenna gain)
then above 30dBm, one dB output power
reduced, then 3dB antenna gain increased
For outdoor use
X
FCC 23dBm
ETSI 20dBm ave.
23dBm peak. 23dBm 30dBm
X
EIRP limitaton:
EIRP = Effective,Isotropic Radiated Power
= Device Output Power + Antenna Gain - Cable Loss
Model Cable Type Length Interface Cable loss (dB)
@ 2.4GHz
Cable loss(dB)
@5GHz
ANT24-CB03N LMR400 3m N plug to N jack 1 1.75
ANT24-CB06N LMR400 6m N plug to N jack 1.85 2.7
ANT24-CB09N LMR400 9m N plug to N jack 2.6 3.8
Note:
1. The loss value includes two connectors ( around 0.3~0.4dB
@ 2.4GHz, 0.39~0.52dB
@5GHz).
2. The longer cable you use, the more attenuation it causes, therefore, the extended range might be
shorten then a normal link with default cables.
3. To comply with EU regulation, please use longer cables which can cause enough attenuation value.
4. For more detail of connectors type, please refer to the appendix page.(P.30)
Cable Loss
ANT24-Series
ANT24-Series
D-Link ANT24-0401
Ceiling Mount Antenna
Electrical specication
Environmental & Mechanical Characteristics
Temperature -10°C to 55°C
Humidity 100% @ 25 C
Lightning protection DC ground
Radome color white
Radome material ABS
Weight 100gw
Dimensions 132 x 42 mm
120
58°~75°
110g without joint
ANT24-Series
D-Link ANT24-0500 Indoor/Outdoor
Omni-Directional Antenna
Electrical specication
Environmental & Mechanical Characteristics
Survival wind speed 180 km/hr
Temperature -40 C to +80 C
Humidity 100% @ 25 C
Lightning protection DC ground
Radome color Gray-white
Radome material Fiberglass
Radiator material Micro striple line
Weight 0.8kgw
Dimensions 330 x 19 mm
90 o
180o
150o
120o60o
30o
0o
-150o
-90 o
-120o-60
o
-30
o
-3-10-20-30
H-plane Co-polarization Pattern
90
o
180
o
150
o
120
o
60
o
30
o
-150
o
-90
o
-120
o
-60
o
-30
o
-3-10-20-30
V-plane Co-polarization Pattern
0
o
32
Ø19×330mm
D-Link ANT24-0501
Indoor Omni-Directional Antenna
Electrical specication
Physical Properties
Package Contents
-One ANT24-0501 2.4GHz indoor 5dBi omni-
directional Antenna with 1.5M extension cable and
RP-SMA Jack connector
-One RP-SMA/ RP-TNC adaptor
-One registration card and international ofce guide
-Mounting kit includes:
-Two Crews
-Two plastic xings
-One sticker
Frequency Range 2400~2500MHz
Impedance 50Ω Normal
VSWR 1.92 Max
Return Loss -10 dB Maximum
Antenna Structure Helis antenna
Peak Gain ( w/o cable loss) 5dBi
Admitted Power 1 W
Cable loss( 1.5m) 2.1dB@2.45GHz
E-Plane 36 deg.
H-Plane 360 deg.
Cable RG-178 50Ω
Cable length 1.5 M
Cable color Gray
Connector Reverse SMA plug
Antenna Material ABS, ABS+PC
Operating Temp -20°C ~ +65°C
Storage Temp -30°C ~ +75°C
Color Antenna: Metallic gray and silver
Base: Metallic gray
Far-field amplitude of D-link-5dBi-H-1020.nsi
0
345
330
315
300
285
270
255
240
225
210
195 180 165
150
135
120
105
90
75
60
45
30
15
-20 -10 0
dB
Far-field amplitude of D-link-5dBi-v-1020.nsi
36°
0
345
330
315
300
285
270
255
240
225
210
195
180
165
150
135
120
105
90
75
60
45
30
15
-20 -10 0
dB
ANT24-Series
D-Link ANT24-0501C
Indoor Omni-Directional Antenna
Electrical specication
Physical Properties
Package Contents
-One ANT24-0501C 2.4GHz 5dBi indoor
omni-directional antenna with a RP-SMA
plug connector
-One RP SMA/ RP TNC adapter
-One registration card and company contact
guide
Frequency Range 2400~2500MHz
Impedance 50Ω Normal
VSWR 1.92 Max
Peak Gain 5dBi
Admitted Power 1 W
E-Plane 36 deg.
H-Plane 360 deg.
Connector Reverse SMA plug
Antenna Material ABS, ABS+PC
Operating Temp -20°C ~ +65°C
Storage Temp -30°C ~ +75°C
Color Antenna: Metallic gray and silver 36°
ANT24-Series
Electrical Specification
Environmental & Mechanical Characteristics
Frequency range 2400 MHz - 2500 MHz
Gain 5.0dBi
VSWR 2.0 : 1 Max
Polarization Linear, vertical
HPBW/horizontal 360°
HPBW/vertical 40°
Downtilt
Power handling 2 W (cw)
Impedance 50 Ohms
Connector RP SMA Plug
Temperature -10 C to +55 C 
Humidity 95% @5ˈ˖
Radome color Black
Radome material ABS, UV resistant
Weight 20 g
Dimensions ӽ13.5 x 177 mm
H-plane Co-polarization Pattern
24
21
-
18
-
15
-
12
-9
-6
-3
0
3
6
0
30
60
90
120
150
180
210
240
270
300
330
24
21
-
18
-
15
-
12
-9
-6
-3
0
3
6
2400 MHz
2450 MHz
2500 MHz
V-plane Co-polarization Pattern
-24
-21
-18
-15
-12
-9
-6
-3
0
3
6
0
30
60
90
120
150
180
210
240
270
300
330
-24
-21
-18
-15
-12
-9
-6
-3
0
3
6
2400 MHz
2450 MHz
2500 MHz
ANT24-Series
D-Link ANT24-0502
Indoor Omni-Directional Antenna
ANT24-Series
D-Link DWL-50AT
Indoor Omni-Directional Antenna
5.0dBi Typical
2.0:1 Max.
nominal
197 mm(length)
29.5gw
Electrical specication
0
345
330
315
300
285
270
255
240
225
210
195
180
165
150
135
120
105
90
75
60
45
30
15
-20 -10 0
dB
Far-field amplitude of C147-510017-A-V.nsi
2.4GHz 2.45GHz 2.5GHz
0
345
330
315
300
285
270
255
240
225
210
195
180
165
150
135
120
105
90
75
60
45
30
15
-20 -10 0
dB
Far-field amplitude of C147-510017-A-H.nsi
2.4GHz 2.45GHz 2.5GHz
30°
30 degree
360°
D-Link ANT24-0600
Indoor Directional Antenna
Electrical specication
Physical Properties
Package Contents
-One ANT24-0600 2.4GHz indoor 6dBi directional
Antenna with 1.5 Filotex cable and RP-SMA Jack
connector
-One RP-SMA/ RP-TNC adaptor
-One User’s QIG
-Two Crews
-Two plastic xings
-One sticker
Frequency Range 2400~2500MHz
Impedance 50Ω Normal
VSWR 1.92 Max
Return Loss -10 dB Maximum
Antenna Structure Pateh antenna
Peak Gain ( w/o cable loss) 6.0 dBi @ 2.45GHz ( typical)
Admitted Power 1 W
Cable loss( 1.5m) 2.1dB@2.45GHz
E-Plane 68°
H-Plane 80°
Cable Filotex 50Ω
Antenna Cover ABS
Antenna Base PC
Operating Temp -20°C ~ +65°C
Storage Temp -30°C ~ +75°C
Color White
Desktop
Magnetic Attach
Wall Mounting
ANT24-Series
D-Link ANT24-0700
Indoor Omni-Directional Antenna
Electrical specication
Physical Properties
Frequency Range 2400~2500MHz
Impedance 50Ω Normal
VSWR 1.92 Max
Return Loss -10 dB Maximum
Antenna Structure Helis antenna
Peak Gain ( w/o cable loss) 7dBi
Admitted Power 1 W
Cable loss( 1.5m) 2.1dB@2.45GHz
E-Plane 24 deg.
H-Plane 360 deg.
Cable RG-178 50Ω
Cable length 1.5 M
Cable color Gray
Connector Reverse SMA plug
Antenna Material ABS, ABS+PC
Operating Temp -20°C ~ +65°C
Storage Temp -30°C ~ +75°C
Color Antenna: Metallic gray and silver
Base: Metallic gray
Package Contents
-D-Link ANT24-0700 2.4GHz Omni-Directional Indoor
Antenna
-SMA to TNC Adapter
-Magnetic Base with 1.5m Extension Cable
-Mounting Kit
-Installation Guide
ANT24-Series
D-Link ANT24-0700C
Indoor Omni-Directional Antenna
Electrical specication
Physical Properties
Package Contents
-One ANT24-0700C 2.4GHz 7dBi indoor omni-
directional antenna with a RP-SMA plug connector
-One RP SMA/ RP TNC adapter
-One registration card and company contact guide
Frequency Range 2400~2500MHz
Impedance 50Ω Normal
VSWR 1.92 Max
Return Loss 10 dB Maximum
Antenna Structure Helis antenna
Peak Gain ( w/o cable loss) 7dBi
Admitted Power 1 W
Cable loss( 1.5m) 2.1dB@2.45GHz
E-Plane 24 deg.
H-Plane 360 deg.
Cable RG-178 50Ω
Cable length 1.5 M
Cable color Gray
Connector Reverse SMA plug
Antenna Material ABS, ABS+PC
Operating Temp -20°C ~ +65°C
Storage Temp -30°C ~ +75°C
Color Antenna: Metallic gray and silver
Base: Metallic gray
ANT24-Series
D-Link ANT24-0801 Indoor/Outdoor
Directional Panel Antenna
Electrical specication
Environmental & Mechanical Characteristics
Survival wind speed 216 km/hr
Temperature -40 C to +80 C
Humidity 95% @ 55 C
Lightning protection DC ground
Radome color Gray-white
Radome material ABS, UV resistant
Housing material AL6063
Weight 0.3 kgw
Dimensions 120 x 120 x 43 mm
Frequency 2400~2500MHz
Gain 8.5 dBi
VSWR 1.5 : 1 Max
Polarization Linear, vertical
HPBW / horizontal 65
HPBW / vertical 65
Front to back ratio 15 dB
Power handling 50 W (cm)
Impedance 50 Ohms
Connector N - female
65°
ANT24-Series

Tuotetiedot

Merkki: D-Link
Kategoria: Ei luokiteltu
Malli: ANT24-0700

Tarvitsetko apua?

Jos tarvitset apua merkille D-Link ANT24-0700 esitä kysymys alla ja muut käyttäjät vastaavat sinulle