Crystal Video BeamLink-Ultimate Käyttöohje
Crystal Video
Ei luokiteltu
BeamLink-Ultimate
Lue alta 📖 käyttöohje suomeksi merkille Crystal Video BeamLink-Ultimate (38 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 24 henkilölle ja sai 4.5 tähden keskimäärin 12.5 käyttäjältä
Sivu 1/38
2019.11.18
BeamLink-Ultimate
Full HD
High Definition
Frequency
5GHz
Range
500m
Ultra Low
Latency
4
Channel
Video
Streaming
IP
Intercom*4
EU Environmental Protection
Waste electrical products should not
be disposed with household waste.
Please recycle where facilities exist.
Consult to your local authority or retailer
for recycling advice.
All-in-one Wireless Transmission
Transmitter:7081
Receiver:3060+3081
User Manual
User Manual V1.0
This user manual applies to
professional products:
CVW
01
01
02
03
07
03
05
07
09
01
About the User Manual
Product Features
Brief Introduction
Packing List
Machanism & Interface
Wireless HD Transmitter 7081
Wireless HD Receiver 3060+3081
Product Installation
Wireless HD Transmitter 7081
Wireless HD Receiver 3060+3081
Contents
Specification
Product Application
Parameters Configuration
16
19
24
27
14
22
29
OLED Display Description
Functional Instructions
Wireless Software Upgrade
Troubleshooting
01
02
BeamLink-Ultimate is an upgraded version of the BeamLink Quad that
adds voice intercom capabilities. It is a set of 4TX-to-1RX full-HD audio
and video wireless transmission system and wireless voice intercom system.
The 4-channel image transmission and voice intercom share one wireless
channel and supports the highest video resolution of 1080P/60Hz. This
system is based on 5G wireless network technology for transmission, along
with advanced 4×4 MIMO and Beam-Forming technology. Image processing
is performed using H.264 technology, and thus the images has higher resolution
and the latency is lower. It is the best companion for the director to shoot,
using advanced VoIP technology, integrated with voice intercom function,
which is clear in voice and easy to carry. The transmitteris CP7081, and the
receiver is the combination of CP3060 and CP3081, which are connected via
a network cable.
About the User Manual
This Manual details the product specifications, instructions for use,
precautions, and troubleshooting. Read the Manual carefully before using
the product. If you have any questions or difficulties in using this product,
contact the company or the seller in time.
Product Features
Brief Introduction
This product supports HD-SDI&3G-SDI input and output as well as HDMI full-HD
input and output, with the highest resolution of 1080P/60Hz. With highest
compress ratio and best video resolution using H.264 technology, and the latency
is as low as 70ms.
4 transmitters and 1 receiver share one wireless channel
High-quality and ultra low latency
This product supports 4 video streams input simultaneously, with resolution
up to 1080P60 per channel. 4 video streams share one wireless channel,
which greatly saves spectrum resources and provides great convenience for
users to perform multi-camera shooting.
* Do not use this product for a long time in the sun or dusty place.
* Be sure to use this product within the temperature and humidity ranges.
Do not operate the product under vibration or strong magnetic fields.*
* Do not put conductive materials in the product vents.
* Do not open the product yourself without the guidance of our professionals.
* Before power-on, make sure that the adapter input voltage is AC110V-220V,
and that the output voltage and current meet the product specifications.
* Before power-on, make sure that the antennas are installed.
* This product is a 5GHz WiFi device. When there are devices with the same
frequency around, there may be mutual interference. In this case,
solve the problem by switching the frequency channel of the product.
Special Precautions
The RS232 and Tally function interfaces of this product are non-standard
physical interfaces. If you need this function, communicate with the
sales staff.
Thank you for choosing CVW's professional wireless HD audio
and video transmission product. Read the following precautions
carefully before using this product:
When installing the machine with the double-thread screw supplied with
the product, tighten the product with the fastening screw plate. Do not
hold the machine for rotary tightening to prevent the screw from being
unable to be removed from the machine.
Tuotetiedot
| Merkki: | Crystal Video |
| Kategoria: | Ei luokiteltu |
| Malli: | BeamLink-Ultimate |
Tarvitsetko apua?
Jos tarvitset apua merkille Crystal Video BeamLink-Ultimate esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Ei luokiteltu Crystal Video Käyttöohjeet
11 Joulukuuta 2024
11 Joulukuuta 2024
Ei luokiteltu Käyttöohjeet
- Ei luokiteltu KED
- Ei luokiteltu Nureva
- Ei luokiteltu Morley
- Ei luokiteltu Europalms
- Ei luokiteltu Kenmore
- Ei luokiteltu Apogee
- Ei luokiteltu Pelco
- Ei luokiteltu Unicol
- Ei luokiteltu NeoMounts
- Ei luokiteltu Insta360
- Ei luokiteltu Taurus
- Ei luokiteltu Springfree
- Ei luokiteltu SSV Works
- Ei luokiteltu Shimbol
- Ei luokiteltu Ledlenser
Viimeisimmät Ei luokiteltu Käyttöohjeet
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025