CRUX VIMCF-93 Käyttöohje

CRUX Ei luokiteltu VIMCF-93

Lue alta 📖 käyttöohje suomeksi merkille CRUX VIMCF-93 (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 9 henkilölle ja sai 4.6 tähden keskimäärin 5 käyttäjältä

Sivu 1/2
CHRYSLER
2011 2014 200
2008 2010 300/300C
2008 - 2010 Aspen
2007 2011 Sebring
2008 2017 Town & Country
DODGE
2007 2015 Avenger
2010 2012 Caliber
2008 2017 Caravan
2009 2014 Challenger
200 2010 Charger 8
2008 2012 Dakota
2008 2013 Durango
2009 2010 Journey
2007 2012 Nitro
2009 2012 Ram
JEEP
2008 2010 Commander
2009 2015 Compass
2008 2013 Grand Cherokee
2008 2015 Liberty
2009 2017 Patriot
2007 2017 Wrangler
VOLKSWAGEN
2009 2013 Routan
Retains funconality of MyGig Navigaon system for passenger access at any me.
Plug & Play Installaon.
- Compable with MyGig Radios.
VIMCF- MODULE 93
VIMCF-93 HARNESS
1 / 2
Rev.022317
1. Remove the factory radio to gain access to the factory connectors.
2. Make the T-Harness connecons behind the factory radio and OEM harness.
3. Set the DIP switch to the desired VIM funcon. See DIP seng below.
4. Test the interface funcons before re-installing the factory radio.
The VIMCF-93 has a feature that enables the user to have either a permanent or a non-permanent
VIM funcon. To set VIM to permanent, set DIP#1 to ON. To set to non-permanent, set DIP#1 to
OFF and connect the GREEN wire to +12V using a toggle switch (not included).
1. ON = Permanent VIM Enabled
2. Not Used
3. Not Used
4. Not Used
5. Set to OFF
6. Set to OFF
2 / 2
Rev.022317

Tuotetiedot

Merkki: CRUX
Kategoria: Ei luokiteltu
Malli: VIMCF-93

Tarvitsetko apua?

Jos tarvitset apua merkille CRUX VIMCF-93 esitä kysymys alla ja muut käyttäjät vastaavat sinulle