Celly SOLARPRO10W Käyttöohje
Celly
Ei luokiteltu
SOLARPRO10W
Lue alta 📖 käyttöohje suomeksi merkille Celly SOLARPRO10W (30 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 22 henkilölle ja sai 3.6 tähden keskimäärin 11.5 käyttäjältä
Sivu 1/30
Read this user manual and in
particular the safety notes,
before using the product.
Keep the user manual for future
reference and include it when passing the
product on to third parties.
Esprinet S.p.A. will not in any way be
held responsible for injury or damage
caused to persons or property arising
from misuse of the product.
Safety notes
Avoid overheating the electronic board
with USB port. During use, keep the
board with USB port protected from
direct sunlight.
Avoid excessive overheating
During use the product will be subject of
high temperature: pay attention to not
burn yourself.
Do not use the product if it is damaged.
Never touch the product with wet or
damp hands.
Do not use in damp rooms or in the rain.
Never insert metallic objects such as
keys or paper clips into the openings of
the product.
To prevent malfunction or damage to the
product, avoid accidental falls, do not
crush, puncture or exercise a high level of
pressure on the product.
Keep away from humidity, water or other
liquids. If the product comes into contact
with water, moisture or other liquids, do
not use it to avoid any electrical shock
or damage.
Do not store or expose your product to
any source of heat, radiators, stoves
or other heat sources such as the
dashboard of your car in the summer.
Never operate the product unsupervised.
During operation, the housing may
become hot.
Never use the product when moving from
a cold to a warm environment.
Condensation may occur and, in some
cases, damage the product. Allow the
product to reach room temperature
before connecting and using it again. is
could take several hours.
Temperature of use: 0–40 °C.
Do not try to modify, repair or
disassemble the product.
Do not use a damaged product. Do
not under any circumstances use
aggressive cleaning agents, alcohol or
other chemical solutions for cleaning as
they can damage the housing or even
impair the functionality of the product.
Disconnect all connected cables before
you start cleaning. Do not immerse
the product in water or other liquids.
ere are no serviceable parts inside
the product. Never open/disassemble it.
Keep the product out of reach of children.
Never allow children or persons with
disabilities to use electrical products
without supervision. Make sure that
children do not play with the plastic
wrapping. they may swallow it when
playing and suffocate.
Use
1- Once unfolded the product, place it
on a flat surface, away from direct water
jets, with solar panels facing the sunlight.
Place the board with USB port protected
from direct sunlight.
2. Connect your cable to the device you
want to charge.
3. Connect the USB cable to the solar
charger’s USB port.
4. With sufficient sunglight, charging of
your device will be started.
5. Disconnect the USB cable from the
charger after use.
6. Store the charger safe, in a dry
environment away from heat sources.
Cleaning
Disconnect all cables before cleaning.
If necessary, clean the solar charger with
a damp cloth and let it dry completely
before use.
Use a clean brush with soft, long bristles
to remove dust on the connectors.
Do not use any solvents, corrosive or
gaseous cleaning agents.
Make sure no water or other liquids
penetrate the housing.
Disposal of the product
(Applicable in countries with
separate collection systems of
recyclable materials) Old products may
not be disposed of in the household
waste! Should the product no longer be
capable of being used at some point in
time, dispose of it in accordance with the
regulations in force in your country.
is ensures that old products are
recycled in a professional manner and
also rules out negative consequences for
the environment.
For this reason, electrical equipment is
marked with the symbol shown here.
Technical specifications
Conversion efficiency: 22%
Output: DC 5V/2A
Weight: 220g
Temperature of use: 0-40 ° C
is product complies with
RoHS 2011/65/EU and
2015/863/EU. e product
carries the CE mark and complies with
safety standards established by the
European Union.
Celly® is a trademark owned by Esprinet
S.p.A.
All brands are registered trademarks of
their respective owners.
Esprinet S.p.A., via Energy
Park 20, 20871 Vimercate
(MB) - Italy
Made in China.
User manual
SOLAR CHARGER WITH USB
Model: SOLARPRO10W
Rev00 - 01.03.2022
EN
Tuotetiedot
| Merkki: | Celly |
| Kategoria: | Ei luokiteltu |
| Malli: | SOLARPRO10W |
Tarvitsetko apua?
Jos tarvitset apua merkille Celly SOLARPRO10W esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Ei luokiteltu Celly Käyttöohjeet
21 Helmikuuta 2025
25 Joulukuuta 2024
25 Joulukuuta 2024
24 Joulukuuta 2024
24 Joulukuuta 2024
24 Joulukuuta 2024
24 Joulukuuta 2024
24 Joulukuuta 2024
24 Joulukuuta 2024
17 Lokakuuta 2024
Ei luokiteltu Käyttöohjeet
- Ei luokiteltu Bora
- Ei luokiteltu HELGI
- Ei luokiteltu Woood
- Ei luokiteltu Sharkoon
- Ei luokiteltu Giordani
- Ei luokiteltu Hotone
- Ei luokiteltu GoXtreme
- Ei luokiteltu Swissvoice
- Ei luokiteltu SetonixSynth
- Ei luokiteltu Soundsphere
- Ei luokiteltu Muller
- Ei luokiteltu Infinity
- Ei luokiteltu Gold Note
- Ei luokiteltu Orion
- Ei luokiteltu AJA
Viimeisimmät Ei luokiteltu Käyttöohjeet
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025