Celly PBE20000 Käyttöohje
Celly
tehopankki
PBE20000
Lue alta 📖 käyttöohje suomeksi merkille Celly PBE20000 (15 sivua) kategoriassa tehopankki. Tämä opas oli hyödyllinen 25 henkilölle ja sai 4.2 tähden keskimäärin 13 käyttäjältä
Sivu 1/15
Read this user manual and
in particular the safety notes
before using the product.
Keep the user manual for future reference
and include it when passing the product
on to third parties.
Esprinet S.p.A. will not in any way be held
responsible for injury or damage caused
to persons or property arising from misu-
se of the product.
Safety notes
To prevent malfunction or damage to the
product, avoid accidental falls, do not
crush, puncture or exercise a high level of
pressure on the product. is can cause
an internal short-circuit and overheating.
Keep away from humidity, water or other
liquids. If the product comes into contact
with water, moisture or other liquids, do
not use the product to avoid any electrical
shock, explosion or damage.
If the product gets wet, even if it is drying
up and operating normally, the battery
contacts and the circuitry could slowly
corrode and pose a safety hazard.
Do not store or expose the product to any
source of heat, direct sunlight, radiators,
stoves or other heat sources such as the
dashboard of your car in the summer. is
could cause the battery to explode or
compromising performance. Never opera-
te the product unsupervised.
During operation, the housing becomes
hot. Allow adequate ventilation. e hou-
sing must never be covered.
Never use the product when moving from
a cold to a warm environment. Condensa-
tion may occur and, in some cases, dama-
ge the product.
Allow the product to reach room tempera-
ture before connecting and using it again.
is could take several hours.
Temperature of use: 0–40 °C.
Do not try to modify, repair or disassem-
ble the product. Risk of explosion!
Do not leave the product in contact with
metal objects.
Metallic objects can interfere with the
electrical connections and cause an acci-
dent if the internal
protection circuit of the product is not
working properly.
Immediately stop using the product if you
see a bulge, dispersion or other abnorma-
lities.
Do not use a damaged product.
Make sure that the provided cable for
charging the product is intact and never
short-circuit the charging outputs.
A non-replaceable rechargeable battery
is integrated in the product. ere are no
serviceable parts inside the product. Ne-
ver open/disassemble it.
Never short circuit the contacts/battery
terminals.
Do not dispose of the product into fire.
ere is danger of explosion and fire!
Charge the battery regularly, even when
the product is unused. is will prolong its
lifespan (once time every 2 months)
Never charge the product when it is unat-
tended. While charging, place the product
on a heat resistant surface. Accumulation
of heat is normal during charging.
Do not under any circumstances use ag-
gressive cleaning agents, alcohol or other
chemical solutions for cleaning as they
can damage the housing or even impair
the functionality of the product.
Disconnect all connected cables before
you start cleaning. Do not immerse the
product in water or other liquids.
Do not press too hard on the housing to
avoid scratching. Keep the product out of
reach of children. Never allow children or
persons with disabilities to use electrical
products without supervision.
Make sure that children do not play with
the plastic wrapping. ey may swallow it
when playing and suffocate.
Charging the power bank
1. Insert the smaller end of the provided
micro USB cable in the micro USB port of
the power bank.
2. Connect the larger end of the micro
USB cable into the USB port of a char-
ging socket or computer. Charging of the
power bank will be started. We recom-
mend 12-hour charging for the first char-
ge cycle. While the power bank is char-
ging, white light will blink. If the power
bank is fully charged, white light will stop
blinking. e charging time is 10 hours.
3. Disconnect the micro USB cable from
the USB port and the power bank after
charging.
Charging your devices
1. Make sure the power bank is sufficient-
ly charged.
2. Before charging your device, make
sure its technical characteristics (voltage,
output and amperage) are compatible
with the power bank.
3. Connect your device to the USB port of
the power bank, using the device’s origi-
nal cable. Charging of your device will be
started.
4. Disconnect the device’s cable from the
device and the power bank after charging.
Cleaning
Disconnect all cables before cleaning.
If necessary, clean the power bank with
a damp cloth and let it dry completely
before use.
Use a clean brush with soft, long bristles
to remove dust on the connectors.
Do not use any solvents, corrosive or ga-
seous cleaning agents.
Make sure no water or other liquids pene-
trate the housing.
Storage
Store the power bank in a clean, dry area.
Keep it away from direct sunlight.
CUSTOMER’S INFORMATION
FOR RIGHT WASTE OF THIS PRO-
DUCT (Directive 2013/56/EU)
is marking on the product or its packa-
ging means that the product at the end of
its life, inlcuding the unremovable battery,
must be separated from other types of
waste to recycle it responsibly.
Safely’s use of this product is guarante-
ed from the respect of this instructions
manual, keep it and carefully use it for all
life of the product. e product doesn’t
need any kind of technical maintenance,
NEVER DISASSEMBLE IT. e battery
inside the product is integrated and not
replaceable. Don not try to remove li-ion/
polymer battery included in inside the
product because can produce overheat’s
danger, burning and injury. e battery
must be removed only by qualified profes-
sional techincians, that are able to remo-
ve it without any kind of danger and to
recycle it in the respect of the law. Users
should give free end of life product into
the local separate collection centers or
to the retailer, in reason of one to one,
or free if the product size is bigger than
25 cm. Adequated waste disposal permit
to award the product to recycling, treat-
ment with ecofriendy compatible disposal
conduce to prevent possible harm to the
environment or human health and pro-
mote the reuse and/or product materials
recycling. Unauthorized waste disposal of
electronic product, cell and battery from
houseold user involve currency legislation
sanctions.
Technical specifications
MicroUSB input: DC 5V / 2A
Type-C input: DC 5V / 2A
Output 1: DC 5V / 2.1A
Output 2: DC 5V / 2.1 A
Total output: DC 5V / 2.1A
Weight: 350g
Size: 141x69x28mm
Capacity: 20000 mAh / 74Wh
Battery type: Li-Ion
Charging time: 10-11h
Working temperature: 0 - 40 °
is product complies with
RoHS 2011/65/EU-2015/863/
EU. e product carries the CE
mark and complies with safety standards
established by the European Union.
e full text of the EU declaration of con-
formity is available at the following inter-
net address: www.celly.com
Celly® is a trademark owned by CELLY
S.p.A.
All brands are registered trademarks of
their respective owners.
Esprinet S.p.A., via Energy Park
20, 20871 Vimercate (MB) -
Italy
Made in China.
User manual
POWERBANK
Model: PBE20000
Rev02 - 22.12.2020BK
EN
Tuotetiedot
| Merkki: | Celly |
| Kategoria: | tehopankki |
| Malli: | PBE20000 |
Tarvitsetko apua?
Jos tarvitset apua merkille Celly PBE20000 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
tehopankki Celly Käyttöohjeet
26 Joulukuuta 2024
26 Joulukuuta 2024
25 Joulukuuta 2024
17 Lokakuuta 2024
15 Lokakuuta 2024
tehopankki Käyttöohjeet
- tehopankki Goobay
- tehopankki ToughTested
- tehopankki Maglite
- tehopankki Philips
- tehopankki Goodis
- tehopankki Schwaiger
- tehopankki GoGEN
- tehopankki ADATA
- tehopankki Ryobi
- tehopankki Hummer
- tehopankki Hama
- tehopankki SKROSS
- tehopankki GP
- tehopankki Anker
- tehopankki Urban Factory
Viimeisimmät tehopankki Käyttöohjeet
30 Maaliskuuta 2025
30 Maaliskuuta 2025
28 Maaliskuuta 2025
27 Maaliskuuta 2025
27 Maaliskuuta 2025
27 Maaliskuuta 2025
27 Maaliskuuta 2025
13 Maaliskuuta 2025
13 Maaliskuuta 2025
10 Maaliskuuta 2025