Celly CLEAR Käyttöohje
Celly
Kuulokkeet
CLEAR
Lue alta 📖 käyttöohje suomeksi merkille Celly CLEAR (15 sivua) kategoriassa Kuulokkeet. Tämä opas oli hyödyllinen 27 henkilölle ja sai 4.5 tähden keskimäärin 14 käyttäjältä
Sivu 1/15

Please read this manual and
pay attention to the safety
warnings before using the
product
Keep the manual to have the possibility
to consult it at a later time, or in case of
passing the product to a third party.
Esprinet S.p.A. can not in any way be held
responsible for injury or damage caused to
people or things resulting from improper
use of the product.
Safety rules
Avoid listening at volumes that are too
loud, especially for prolonged periods
while using the product.
If you use the product at an excessive
volume, it could permanently damage your
hearing. Listen at a moderate volume.
Audio alerts, warnings, and environmental
noises may sound different when using
the product.
Be aware of how these signals differ in
terms of sound so that you can recognize
the signals in corresponding situations.
Do not use the product while driving a
motor vehicle, cycling, using machines, or
in other situations where noise awareness
in your surroundings could affect you or
others. At the same time, also observe
the laws and regulations of the country in
which you use the product.
To avoid malfunction or damage to the
product, avoid accidental falls, do not
crush, puncture or exert a high level of
pressure on the product.
Keep the product away from moisture,
water or other liquids.
Do not store or expose the product to
any heat source, direct sunlight, radiator,
heater or other heat source such as your
car dashboard in the summer.
Do not attempt to modify, repair or
disassemble the product.
Do not use the damaged product.
Never use aggressive detergents, alcohol
or other chemical solutions for cleaning as
they could damage the housing or even
impair the functionality of the product.
Do not immerse the product in water or
other liquids. ere are no serviceable
parts inside the product. Never open and
take it apart. Keep the product out of the
reach of children.
Never allow children or people with
disabilities to use electrical products
unsupervised.
Make sure that children do not play with
the plastic wrap, they could swallow it and
choke.
Make sure that children do not remove
small parts from the product and play with
them.
Reload
When using for the first time, charge the
battery to maximum capacity. To recharge,
plug the USB-C charging cable into the
product's charging port. e flashing red
light at the bottom of the charging box
indicates that charging is in progress.
When the light becomes solid, the
charging of the box is complete.
Once the earphones are placed inside
the charging box, charging will begin and
a steady blue light will light up on the
charging box. When the blue light goes
out, the earphones will be fully charged.
Pairing
e earphones, once the case is opened
and extracted, will turn on automatically.
e earphones must be connected to the
device within 5 minutes, otherwise they
will go into power saving mode. To activate
the pairing mode again, simply place the
earphones in the charging case, close it
and wait a few seconds before reopening
it, following the above procedure again.
Now activate the wireless function on the
device, search for CLEAR, select it once
identified and connect it. You will hear a
sound when the pairing is completed. If
prompted for a password, enter "0000".
Automatic reconnection
Once the headset and device have been
paired once, they will automatically
reconnect when your device's wireless
feature is on and within range.
MONO / STEREO operation
Only one headset can be used for music
playback or for making calls. is function
(MONO) can be used with both earphones.
To use this function, remove only one
earphone from the charging box. If you
want to switch to stereo mode, take out
the second earphone at any time as well.
Conversely, if you want to switch to mono
mode, put a headset in the charging box
at any time
Multifunction buttons Automatic shutdown
1. If connected to a device, after
disconnecting the wireless connection the
headset will automatically turn off after 5
minutes.
2. If you don't connect your phone, the
headset will automatically turn off in 5
minutes.
Pairing between left and right earphones
If the connection between the left and
right earphones is lost, put both earphones
back inside the charging box, close it and
wait for a few seconds before reopening
it. e earphones will automatically re-
connect to each other. If the process
just described does not work, disconnect
the earphones from your device, wait a
few minutes, then reconnect them (the
earphones must be placed inside the
charging box). For both procedures it is
necessary that the earphones inside the
charging box are charging, so make sure
that the charging box has a sufficient
charge level to ensure the charging of the
earphones.
Maintenance
1. Do not use abrasive solvents to clean
the product;
2. Do not attack the product with any
kind of sharp object as it may scratch or
damage the product;
3. Keep the product away from high
temperatures, dust and humidity.
Features
Wireless version: 5.3
Earphone charging time: 1h
Charging box charging time: 1.5h
Earphone Battery: Li-polymer Battery
35mAh / 3.7V, 0.13Wh
Charging box battery: Li-polymer Battery
300mAh / 3.7V, 1.11 Wh
Microphone sensitivity: -38 ± 1dB
Frequency response: 20Hz ~ 20KHz
Rated power: 3mW
Maximum power: 5mW
Operating range: 10m
Talk time: 5h
Playback time: 5h
Standby time: 100h
Earphone size: 31.5 * 20 * 23mm
Charging box size: 55.87 * 47.14 *
23.9mm
Usage temperature: 0 ~ 40°C
Single earphone weight: 3.5g
Charging box weight: 29g
Maximum radiated power: <20mW
Maximum input power: DC 5V / 0.5A
Frequency range: 2,402GHz - 2,480GHz
USB-C charging cable included
User information for proper
disposal (Directive 2013/56 / EU)
e crossed-out bin symbol shown
on the equipment or on its packaging
indicates that the product at the end of
its useful life, including the non-removable
battery, must be collected separately
from other waste to allow for proper
treatment and recycling. e safe use of
this product is guaranteed in compliance
with the following instructions, therefore
it is necessary to keep them and follow
them scrupulously throughout the life
of the product. e product does not
require technical maintenance, NEVER
DISASSEMBLE IT. e battery inside is
integrated and not replaceable. Do not
attempt to remove the built-in Lithium
Ion / Polymer battery yourself as it
may cause overheating, fire and injury.
e battery should only be removed by
independent qualified professionals who
are able to remove it safely and disposed
of in accordance with applicable laws. e
user must therefore give the equipment
at the end of its life free of charge to
the appropriate municipal centers for
the separate collection of electrical and
electronic waste, or return it to the
retailer, on a one-by-one basis, or free
of charge for appliances with smaller
external dimensions. to 25 cm. Adequate
separate collection for the subsequent
sending of the decommissioned
equipment for recycling, treatment and
environmentally compatible disposal helps
to avoid possible negative effects on the
environment and health and favors the
reuse and / or recycling of the materials
of which it is composed the equipment.
Illegal disposal of equipment, batteries
and accumulators by the user involves the
application of the penalties provided for in
the current legislation.
is product complies with RoHS
directive 2011/65 / EU and
2015/863 / EU. e Product has
the CE mark and therefore complies with
the safety standards established by the
European Union. Esprinet SpA declares
that the product complies with directive
2014/53 / EU.
Esprinet SpA declares that the product
complies with directive 2014/53 / EU.
e full text of the EU declaration of
conformity is available at the following
Internet address: www.celly.com/
Exchange/CELLY-SPA/Dichiarazioni_di_
conformita/CLEAR/DOC_CLEAR.pdf
Celly® is a trademark owned by Esprinet
S.p.A.
All brands are registered trademarks of
their respective owners.
Esprinet S.p.A., via Energy Park
20, 20871 Vimercate (MB) -
Italy
Made in China.
User manual
TRUE WIRELESS EARPHONES
Model: CLEAR
Rev00 - 21.07.2022
Left earphone (L) Right earphone (R)
Play/pause Single click Single click
Reply/end calls Double click Double click
Refuse calls Long press Long press
Previous track Double click //
Next track // Double click
Volume - Long press //
Volume + // Long press
Voice assistant Triple click //
Game/music mode // Triple click
EN
Tuotetiedot
| Merkki: | Celly |
| Kategoria: | Kuulokkeet |
| Malli: | CLEAR |
Tarvitsetko apua?
Jos tarvitset apua merkille Celly CLEAR esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Kuulokkeet Celly Käyttöohjeet
1 Huhtikuuta 2025
1 Huhtikuuta 2025
1 Huhtikuuta 2025
1 Huhtikuuta 2025
1 Huhtikuuta 2025
1 Huhtikuuta 2025
1 Huhtikuuta 2025
1 Huhtikuuta 2025
1 Huhtikuuta 2025
1 Huhtikuuta 2025
Kuulokkeet Käyttöohjeet
- Kuulokkeet ModeCom
- Kuulokkeet Havit
- Kuulokkeet Bose
- Kuulokkeet Roland
- Kuulokkeet Xmusic
- Kuulokkeet GoGEN
- Kuulokkeet TELEX
- Kuulokkeet Ejeas
- Kuulokkeet Kenwood
- Kuulokkeet Tascam
- Kuulokkeet Greenmouse
- Kuulokkeet CKMOVA
- Kuulokkeet S.M.S.L
- Kuulokkeet Thomson
- Kuulokkeet Boompods
Viimeisimmät Kuulokkeet Käyttöohjeet
9 Huhtikuuta 2025
9 Huhtikuuta 2025
8 Huhtikuuta 2025
3 Huhtikuuta 2025
3 Huhtikuuta 2025
1 Huhtikuuta 2025
1 Huhtikuuta 2025
31 Maaliskuuta 2025
30 Maaliskuuta 2025
30 Maaliskuuta 2025