Casio HA-D62IO Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Casio HA-D62IO (2 sivua) kategoriassa Laatikko. Tämä opas oli hyödyllinen 60 henkilölle ja sai 4.6 tähden keskimäärin 9 käyttäjältä

The optional Ethernet cradle allows you to transfer (download and upload) system data

and file data between the IT-600 and a computer over a USB or LAN connection. You

can also use the Ethernet cradle to charge the battery pack installed in the IT-600.

Ethernet Cradle (HA-D62IO) Instruction

After reading this instruction, keep it in a safe place for future reference.

• This instruction provides a basic guide to using the Ethernet cradle.

• For information on safety precautions, refer to the IT-600 User’s Guide.

E

Right

Top

Front

General Guide

Back

Ethernet Cradle (HA-D62IO) Specifications

1.LAN Specifications

Communications protocol:IEEE 802.3

Media type:10base-T/100base-TX auto-switched

2.USB

Protocol:USB Ver1.1 Standard

Transfer Rate:12Mbps (max.)

3.Charging

Charging System:Fixed-voltage (with current limiter)

Charge Period:Approximately 4 hours (battery pack)

Approximately 7 hours (large-capacity battery pack)

4.Power Supply

Power Requirement:AC adaptor (AD-S42120AE)

Power Consumption:12V DC approximately 1.6A

Output to Handheld Terminal:

5V DC 2.5A (max.)

5.AC Adaptor

Model:AD-S42120AE

Input:100V to 240V AC 50/60Hz 1.3-0.7A

Output:12V DC 3.5A

6.Dimensions and Weight

Dimensions:Approximately 110(W) 106(D) 93(H) mm××

(4

5

⁄

16

"W × 4

3

⁄

16

"D × 3

11

⁄

16

"H)

Weight:Approximately 310g (10.9oz)

7.Operating Environment

Temperature:0°C to 40°C (32°F to 104°F)

Humidity:30% to 80% RH (non-condensation)

Printed on recycled paper.

PN410405-001 Printed in Malaysia

CASIO COMPUTER CO., LTD.

6-2, Hon-machi 1-chome

Shibuya-ku, Tokyo 151-8543, Japan

MO0606-A

This port is used to transfer system data and file data (download, upload) by

connecting the Ethernet cradle to a PC using a USB cable (DT-380USB). A

dedicated driver must be installed in the PC before connecting the Ethernet cradle to

the PC.

This switch is used to switch between a USB connection and a LAN connection.

This LED shows the status of the LAN connection.

Off: LAN cable not connected correctly.

Lit green: LAN cable connected correctly.

This LED shows the LAN operation status.

Off: No communication.

Blinking green: Communication in progress.

This port is used for connecting the cradle to a computer or hub over a LAN cable

so that system data and file data can be transferred (uploaded or downloaded).

Special driver software must be installed in the IT-600.

Use this jack to connect the AC adaptor (optional) to supply power to the Ethernet cradle.

This switch detects when the IT-600 is seated correctly in the Ethernet cradle.

Power is supplied to the IT-600 via these contacts.

This LED indicates the power status and the mounting status of the IT-600.

Off: IT-600 is not installed. Or, the AC adaptor is not connected.

Green: Ethernet cradle turned on, IT-600 correctly set in the cradle.

Use these hooks to lock the IT-600 into the Ethernet cradle.

1USB Port

2Selector Switch

3LAN Connection

Status LED

4LAN

Communication

Status LED

5LAN Port

6AC Adaptor Jack

7

Terminal Detect Switch

8

Ethernet Cradle Contacts

9Power Indicator

LED

10Mount Hooks

Tuotetiedot