Cameo CLLEKS20M Käyttöohje
Cameo
Ei luokiteltu
CLLEKS20M
Lue alta 📖 käyttöohje suomeksi merkille Cameo CLLEKS20M (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 16 henkilölle ja sai 5.0 tähden keskimäärin 8.5 käyttäjältä
Sivu 1/2
Adam Hall GmbH · Adam-Hall-Str. 1 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
SAFETY INFORMATION
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain
that wall mounts are properly installed and secured. Make certain that the equipment is installed securely
and cannot fall down.
7. During installation, observe the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make
certain that the equipment is always installed so that is cooled sufficiently and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor equipment
- in this case, observe the special instructions noted below. Do not expose this equipment to flammable
materials, fluids or gases.
12. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled
with liquids, such as vases or drinking vessels, on the equipment.
13. Make certain that objects cannot fall into the device.
14. Use this equipment only with the accessories recommended and intended by the manufacturer.
15. Do not open or modify this equipment.
16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to
tripping hazards.
17. During transport, make certain that the equipment cannot fall down and possibly cause property damage
and personal injuries.
18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or
if it has been damaged in another way, switch it off immediately and unplug it from the mains outlet (if it is
a powered device). This equipment may only be repaired by authorized, qualified personnel.
19. Clean the equipment using a dry cloth.
20. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate
plastic and paper/cardboard.
21. Plastic bags must be kept out of reach of children.
FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS:
22. If the equipment has been exposed to strong fluctuations in temperature (for example, after transport), do
not switch it on immediately. Moisture and condensation could damage the equipment. Do not switch on
the equipment until it has reached room temperature.
23. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency
match the values specified on the equipment. If the equipment has a voltage selection switch, connect
the equipment to the power outlet only if the equipment values and the mains power values match. If the
included power cord or power adapter does not fit in your wall outlet, contact your electrician.
24. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at
the mains outlet and/or power adapter and the equipment connector.
25. When connecting the equipment, make certain that the power cord or power adapter is always freely
accessible. Always disconnect the equipment from the power supply if the equipment is not in use or if
you want to clean the equipment. Always unplug the power cord and power adapter from the power outlet
at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter with
wet hands.
26. Whenever possible, avoid switching the equipment on and off in quick succession because otherwise this
can shorten the useful life of the equipment.
27. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter
from the power outlet.
28. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or
before extended periods of disuse.
CAUTION:
To reduce the risk of electric shock, do not remove cover (or
back). There are no user serviceable parts inside. Mainte-
nance and repairs should be exclusively carried out by qual-
ified service personnel.
The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the
unit, which may cause an electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance
instructions.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: https://cdn-shop.adamhall.com/media/
pdf/Manufacturers-Declarations-CAMEO_DE_EN_ES_FR.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Adam-Hall-Str. 1, 61267 Neu Ans
-
pach / Email Info@adamhall.com / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not
be treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled
waste disposal. Please dispose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
FEATURES
Emergency stop for laser
Large red push button switch with rotary release
With key lock to prevent unauthorised operation
Fixed 20 m cable
Interlocking metal mini round connectors
INTRODUCTION AND OPERATION
The CLLEKS20M emergency cut-off switch facilitates installation of an emergency cut-off system to enable remote
switching off of the lasers of connected effect lasers in the event of a dangerous situation. Cameo effect lasers (laser class
3b and 4) can only be operated in a closed interlocking circuit. By pressing the emergency stop switch, a contact is opened
and the circuit is thus interrupted. The Cameo LEKS 20 M has an impact resistant, highly visible yellow plastic housing, a
red emergency stop push button switch with rotary release, a locking switch and a 20-metre fixed cable with metal 2-pin
mini round screw connectors. Put the locking switch into the OFF position to interrupt the interlock circuit switch off the
connected lasers, and into the ON position to activate. Two keys are included. To ensure that an effect laser is not operated
by unauthorised persons, lock the switch and remove the associated keys. Lasers can only be activated when the lock
switch is in the ON position and the emergency stop push button is unlocked (to unlock, turn in the direction of the arrow).
The LEKS 20 M meets European safety regulations for lasers of class 3b and 4 and is compatible with Cameo lasers with
screw-in interlocking 2-pin mini round plug connectors.
SPECIFICATIONS
CLLEKS20M
Emergency Stop Switch with Key Control and 20 m Cable
Article number CLLEKS20M
Product type: Emergency cut-off switch unit for effect laser
Laser shutdown: Emergency stop push button, locking switch
Connection cable: 20 metres, hard-wired in the housing
Connection type: Screw-in 2-pin mini circular connector
Material: Plastic
Colour: Black/yellow, red emergency stop push button
Dimensions (W x H x D): 72 x 65 x 110 mm
Weight with cable: 1.1 kg
Additional features: 2 keys for locking switch included
Tuotetiedot
| Merkki: | Cameo |
| Kategoria: | Ei luokiteltu |
| Malli: | CLLEKS20M |
Tarvitsetko apua?
Jos tarvitset apua merkille Cameo CLLEKS20M esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Ei luokiteltu Cameo Käyttöohjeet
9 Maaliskuuta 2025
Ei luokiteltu Käyttöohjeet
- Ei luokiteltu EBERLE
- Ei luokiteltu SolidDrive
- Ei luokiteltu Bavaria
- Ei luokiteltu GoPro
- Ei luokiteltu Huslog
- Ei luokiteltu Blanco
- Ei luokiteltu Concept
- Ei luokiteltu (Recovery)
- Ei luokiteltu SureFire
- Ei luokiteltu Targus
- Ei luokiteltu Xplora
- Ei luokiteltu Spektrum
- Ei luokiteltu Comfortisse
- Ei luokiteltu Teka
- Ei luokiteltu Sound Devices
Viimeisimmät Ei luokiteltu Käyttöohjeet
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025