BSS Audio Soundweb London 9015US Käyttöohje

BSS Audio Ei luokiteltu Soundweb London 9015US

Lue alta 📖 käyttöohje suomeksi merkille BSS Audio Soundweb London 9015US (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 26 henkilölle ja sai 4.3 tähden keskimäärin 13.5 käyttäjältä

Sivu 1/2
Connecting the BLU-3, BLU-6,
sw9012US and sw9015US
bssaudio.com
The BLU-3 and BLU-6 are resistor based controls that
connect to the Control Inputs on the back of a
Soundweb device. The BLU-3 and BLU-6 are UK
standard switch plate dimensions. The sw9012US and
sw9015US are the same controls in US switch plate
dimensions.
selector switch and a rotary potentiometer. These controls require 3-conductor
wire to connect back to the Control Inputs on the Soundweb device.
The BLU-6 and sw9015US have the same controls; an eight position rotary
selector switch and an Up / Down button pair. These controls require
4-conductor wire to connect back to the
Control Inputs on the Soundweb device.
On the BLU-3 there are connections labeled;
GND, 1 and 2. The GND terminal is
connected back to the ‘C’ or Common
terminal on the Control Inputs of the Soundweb
device. The ‘1’ terminal is for the Source Select
and is connected back to a numbered Control
Input on the Soundweb device. The ‘2’ terminal
is for the Level and is connected back to a
different numbered Control Input on the
Soundweb device. Each Soundweb London
chassis can support connections for up to six
BLU-3 or sw9012US controllers.
SoundwebTM London
2-wire mode

Tuotetiedot

Merkki: BSS Audio
Kategoria: Ei luokiteltu
Malli: Soundweb London 9015US

Tarvitsetko apua?

Jos tarvitset apua merkille BSS Audio Soundweb London 9015US esitä kysymys alla ja muut käyttäjät vastaavat sinulle