Bogen BC1 Käyttöohje

Sivut 2 Engels Ei luokiteltu

Lue käyttöohje merkille Bogen BC1 ilmaiseksi verkossa tai lataa PDF. Ohje on ollut hyödyllinen 30 henkilölle. Kysyttävää mallista? Esitä kysymys

BC1Beam Clamp

The beam clamp mounting system is designed to provide an easy

and secure way of mounting horn speakers to I-beams.

A)For easier installation, detach the horn base (flange) from the horn

(refer to the speaker’s instruction manual for directions on detaching

the base).

B)Bolt the base [3] to the beam clamp [5] using the supplied bolt [1]

and lock washer [2].

Two bolt lengths are provided. Use the longer bolt for mounting

the cast bases of Bogen’s 15W and 30W horns. Use the shorter

bolt for the stamped bases of the 5W and 7W horns.

A flange hole [4] is provided in the base of later model Bogen

horn speakers. For earlier model horns without this hole or

non-Bogen horns, drill a /8” hole in the base.3

NOTE: It is important to use the correct length bolt or else

the clamp or base will not seat properly.

C)Fasten the beam clamp assembly to the web of an I-beam and tighten

the clamp bolt [6] well to secure the horn’s mounting base in place.

D)Place the horn speaker onto its base and finish the electrical

installation and positioning.

Specifications subject to change without notice.

54-9218-01D 0902

www.bogen.com

Arvostele tämä ohje

Tuotetiedot

Jos tarvitset apua merkille Bogen BC1 esitä kysymys alla ja muut käyttäjät vastaavat sinulle