Bobrick B-9806 Käyttöohje
Bobrick
Ei luokiteltu
B-9806
Lue alta 📖 käyttöohje suomeksi merkille Bobrick B-9806 (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 6 henkilölle ja sai 4.7 tähden keskimäärin 3.5 käyttäjältä
Sivu 1/2

14
© 2021 by Bobrick Washroom Equipment, Inc.
Form No. 9806-9807-75_ii Issued 6/21/21 Printed in U.S.A.
In the U.S.A.: BOBRICK WASHROOM EQUIPMENT, INC.
Los Angeles: 6901 Tujunga Ave., North Hollywood, CA 91605-6213: Tel: (818) 982-9600, FAX: (818) 503-1102
New York: 200 Commerce Drive, Clifton Park, NY 12065-1350; Tel: (518) 877-7444, FAX: (518) 877-5029,
or e-mail: customerservice@bobrick.com
In Canada: BOBRICK WASHROOM EQUIPMENT COMPANY
45 Rolark Drive, Scarborough, Ontario M1R 3B1 • Eastern Canada: Tel: (877) 423-6555 • FAX: (877) 423-8555
• Western Canada: Tel: (877) 423-6444 • FAX: (877) 423-8444
BOBRICK.COM
Installation Instructions for Grab Bars
B-9806 and B-9807
no collection
NOTE:
For Installation on
a. Dry-Walls
b. Glass-Partitions and Metal Partitions as well as
c. “back-to-back-installation of two grab bars against each other from
opposite sides of partition-panels (glass and any other partition
material)
Please see separate installation instructions of respected installation kits.
Required Tools
a. Spanner (preferably ring end) 13mm (similar to ½")
b. Laser/Spirit level
c. Phillips head screwdriver
d. sixpcs.#10sheetmetalscrews,athead,stainlesssteel,length
depending on application (e.g. 1/2" length for 1/2" CL-partitions and 1”
length for 1” thick particle board)

32
“Exploded” overview of the grab bar ange:
5. Fit Bolt (M8 Screw) & Knurled Washer through Half-Moon Washer.
1. Securelyxange-basestopanel/wallatcorrectpitch
(18"/24"/36"/42")usingtheappropriatexings(seealsoPCD-Pitch
Circle diameter). Ensure a minimum of 6" from corners/returns so that
a spanner can be used later.
2 Usebaseangeasatemplatetomarkdrillingholesonthewallwitha
pencil.
Baseangehas3pcs.of5.0mm(3/16")mountingholes,equally
spaced 120° apart on a 38.0mm (1-1/2") Bolt/Pitch Circle
Diameter (BCD/PCD).
Bobrickrecommendsusing#10Sheetmetalscrews,athead,length
dependingonapplication.Screwheadswanttobebelowush.Usea
level to assist in laying out.
Screw- and drilling examples :
a. #10sheetmetalscrew,athead,1/2"screwlengthfor1/2"
CL-partitions, 3/16" predrill
b. #10sheetmetalscrew,athead,1"lengthfor1"thickparticle
board, 9/64" predrill
3. Fittheangecoversonbothangeswiththebevellededgefacingout.
6. With the slots in the tube facing down, pass the thread of the bolt (M8 Hex Screw)
through the slot in either end of the tube from the inside. Hold the tube and gently
twist to help the bolt (M8 Hex screw) pass through the slot. Repeat for other end
ofthetubewhilekeepingtheslotsfacingdowntoavoidlosingthepartjusttted.
Make sure the shape of the half-moon washer is aligned with the inside diameter
of the tube.
7. Pushboththreadedbolts(M8HexScrews)intoangeendholeand
ngertightenusingtheknurledwasheronthebolt(M8Hex
Screw). Ensure the radius on the pillar matches the radius of the tube.
Tighten both ends with the ring end of a 13mm spanner making sure not to damage the tube with the spanner.
Fit end caps making sure to locate the screwdriver release recess facing down out of casual observation.
4. PlacePillarsonbothangeswithatendtoange(angecover).
1. Flange Base
2. Flange Cover
3. Pillar
4. Half-Moon-Washer
5. Knurled Washer
6. M8 - Screw, hex head
(13mm, 1/2" or 9/16")
Tuotetiedot
Merkki: | Bobrick |
Kategoria: | Ei luokiteltu |
Malli: | B-9806 |
Tarvitsetko apua?
Jos tarvitset apua merkille Bobrick B-9806 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Ei luokiteltu Bobrick Käyttöohjeet
7 Huhtikuuta 2025
7 Huhtikuuta 2025
7 Huhtikuuta 2025
7 Huhtikuuta 2025
7 Huhtikuuta 2025
7 Huhtikuuta 2025
7 Huhtikuuta 2025
7 Huhtikuuta 2025
7 Huhtikuuta 2025
7 Huhtikuuta 2025
Ei luokiteltu Käyttöohjeet
- Ei luokiteltu Yamaha
- Ei luokiteltu Tactical Fiber Systems
- Ei luokiteltu Xiaomi
- Ei luokiteltu Origin Storage
- Ei luokiteltu Epson
- Ei luokiteltu Perfect Christmas
- Ei luokiteltu Elight
- Ei luokiteltu SuperTooth
- Ei luokiteltu JBL
- Ei luokiteltu Insignia
- Ei luokiteltu Barazza
- Ei luokiteltu Sonorous
- Ei luokiteltu Gemini
- Ei luokiteltu Morphy Richards
- Ei luokiteltu Allen & Heath
Viimeisimmät Ei luokiteltu Käyttöohjeet
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025