Blustream DA11ADE Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Blustream DA11ADE (4 sivua) kategoriassa Digitaaliset dekooderit. Tämä opas oli hyödyllinen 32 henkilölle ja sai 4.6 tähden keskimäärin 16.5 käyttäjältä

Sivu 1/4
DA11ADE QUICK REFERENCE GUIDE
01
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk
Our DA11ADE has been designed to decode two Dante® digital signals to two
unbalanced or balanced analogue audio channels. The DA11ADE is a plug & play
device that is powered using either PoE (Power Over Ethernet) from any PoE
network switch or via local a 12V power supply input. The DA11ADE also supports
AES67 RTP audio transport.
Introduction
DA11ADE
Quick Reference Guide
Decodes two Dante® digital signals to two unbalanced or balanced analogue audio channels
Supports 44.1, 48 & 96 KHz sample rates @ 24 Bit
Configurable Dante® device latency (supports 1, 2 or 5ms configurable using Dante® Controller)
Supports AES67 RTP audio transport
Features Class 3 802.3af PoE for powering of product from any PoE switch
Local 12V power supply input for when network switch does not support PoE*
* PS121PH power supply sold separately
FEATURES:
Connections:
1 Dante® Audio Input - RJ45 socket connects Dante® network.
2 DC Input - Connect to +12VDC power supply (not supplied) if
device is not powered via a PoE switch
3 Audio Output - Phoenix Connector accepts balanced or
unbalanced 2 channel audio output.
Front Panel
1
Rear Panel
3
Wiring Configuration
Balanced - XLR
Unbalanced - RCA
+
-
-
+
2

Tuotetiedot

Merkki: Blustream
Kategoria: Digitaaliset dekooderit
Malli: DA11ADE

Tarvitsetko apua?

Jos tarvitset apua merkille Blustream DA11ADE esitä kysymys alla ja muut käyttäjät vastaavat sinulle